Paring gnx bluetooth headphone

Myron & Davis wireless headphones are likely designed to be used as Bluetooth headphones. They can sync or pair with Bluetooth-enabled devices such as smartphones, tablets, computers, or other compatible devices.
To use the headphones, follow these general steps:

1. Turn on the wireless headphones and put them in pairing mode. This may involve holding down a button or following specific instructions provided in the user manual.
2. On your Bluetooth-enabled device, enable Bluetooth in the settings and search for nearby devices.
3. When you see the Myron & Davis headphones appear in the list of available devices, select them to initiate the pairing process.
4. Once the pairing is successful, you should be able to use the wireless headphones to listen to audio from your connected device.

Keep in mind that the exact pairing process and features may vary depending on the specific model of Myron & Davis wireless headphones you have. If you have the user manual that came with the headphones, it's a good idea to refer to it for detailed instructions. Otherwise, you can try searching online for the manual or contact the manufacturer's customer support for assistance.

If they are Bluetooth headphones make sure they have fresh, fully charged batteries, go to System Preferences and open the "Bluetooth" panel, click on the "+" sign near the bottom left of the page and follow directions to pair headphones to your computer.

Try to contact the vendor for genuine headphones, is your cell phone have bluetooth connection? if any just use bluetooth that have universal connector. so you could use any headphones you want.. hopefully it works..

add it as a new bluetooth device in the bluetooth menu!

Hi, In some states, hands free driving is the law. In order to avoid a ticket you need to talk on your cell phone with a bluetooth headset or speaker or with a headset that attaches directly into the phone. Bluetooth headsets are popular for this and other reasons but connecting it to your phone can be confusing. Here are some steps to help you connect your bluetooth device to your cell phone.

Instructions

Things You'll Need:

* Bluetooth headset
* Bluetooth capable cell phone



Read the owners manual for your bluetooth device. You will need to find the code to pair your headset to your phone. This code is usually 0000 (those are zeroes) but verify before you proceed.


Enter your bluetooth option on your cell phone. These can be found in your menu under "bluetooth," "connections," "settings," or something similar.


Turn on your bluetooth headset and put it in pairing mode. Pairing mode means the bluetooth is ready to be found by your cell phone. To pair your headset, follow the owners manual for your specific bluetooth model.



Select "add device" or "search for new device" from your cell phone. Your cell phone will then search for your bluetooth. Once it is found, or discovered, you will need to enter the pairing code (most likely 0000, check your manual to verify).


Select "connect" to finalize the connection if the bluetooth headset didn't connect automatically after the pairing code was entered. Make a test call with your bluetooth in your ear to ensure it is connected properly.


Hope it helped.
And please don't forget to rate me...

Thanks and have a nice day...

Make sure your headphones are turned off. Hold call button for 6 seconds, until you see the light steadily lit. Now pair with your phone: Motorola HT820, and type passkey: 0000. Done!

You need to press the Bluetooth logo "On" button to turn it on but keep holding it down for a longer time until the red and blue lights start alternate flashing, pairing the headset before entering the, password: 0000.

I downloaded the instructions manual for the Motorola S9 HD and implemented them. It worked fine!

How to pair a Motorola HS850 bluetooth headset How to place a Motorola HS 850 bluetooth headset into paring mode:

1. Close the boom to turn the unit off.
2. Hold down the call button until the blue light comes on.
3. While holding down the call button, swing the boom open.

The headset is now in pairing mode, and you can search for it using your phone. When it asks for a PIN, use 0000.

go on ur phone and go 2 bluetooth pairing. before u click pair, turn on ur headphones and hold the multi function( button w/ play button and phone symbols) button until flashes blue and red lights simultaneously. once flashing, enter and start bluetooth paring on ur phone. the code is 0000. enjoy using ur bluetooth.