Cant hear music through my LG HBS-200 Bluetooth Stereo Headset

Only if your DVD player supports Bluetooth. What is the model of DVD player?

1. You need to charge your headset to full capacity using the charger supplied with it.
2. Disconnect it i.e. your headset from the charging source.
3. Press and hold the "Call/Send" button located on the front of the headset for like 5 seconds to activate pairing mode.
4. You should notice an indicator light begin to flash. Your headset is in pairing mode already.
5. By now, you must have had the bluetooth on your PS3 on.
6. Have both devices pair with each other.

LG headsets use a pairing passkey of four zeros ("0000").

If the stereo earphone output socket is in tact (not broken), most likely the problem maybe the Earphone-cord is broken.

I have this sale problem. I am using a rocketfish micro dongle to connect my LG tone to my PC and I can hear fine. However, when I set the bluetooth mic to default, I only hear these random blips and pings and it shows nothing received in the audio bar.

1

• Press and hold the "PWR/Talk" key on the side of the headset until you hear a beeping noise indicating that the unit has shut down.
  
• 2Press the "PWR/Talk" button for 5 seconds. When you hear a short beep from the headset and see a blinking light, the headset is in pairing mode.
  
• 3Access your phone or other device's Bluetooth menu, then select the option to search for devices.
  
• 4Enter "0000" if prompted for a passkey, then press "OK" to pair the devices.
  

Hold the power button (circular button with phone shape on right headphone) wait for power on. Have your cell search for bluetooth devices and choose to pair with HBS-250. Pair code is 0-0-0-0 (without dashes)

Make sure the headset is off when you hold the call button for 5 sec. And don't stop holding it when you hear/see something happen after the first 2 sec. Keep holding it for the full 5 sec. The blue light will become solid which means it's in pairing mode.

Turn the unit OFF, then press and hold the power/call button for about 5 seconds, until you hear two short beeps and the blue light stays on. Browse for the device and when asked for the PIN, enter four zeroes (0000).

Be sure the the headset in in 'Pairing' mode.
When in pairing mode, the light should be flashing red and blue or have a steady blue.
The put most headsets in pairing mode, turn headset OFF,
then hold the power button until it goes into pairing mode as discribed above.
Then you can discover it with your phone or PC. Pin (pass key) should be 0000 (4 Zeros) or try 1111, 1234, 9999



User Manual
You can obtain a copy of your user manual by locating the FCCID on the label directly on the device,
then then going to the FCC Website - https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm
Be sure to put the first three characters in the first box and the rest (including hyphens) in the second box.

iphone works well with LG HBS 200, I am listening to music in iphone though LG HBS 200 right now..it works like charm