Televison & Video Logo

Related Topics:

Question about Televison & Video

1 Answer

Is a Curtis TV the same as a Curtis Mathis TV

Posted by kelly58 on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 61 Answers

Curtis International Ltd of Etobicoke, Ontario is not Curtis Mathis, famous for building quality TV sets.

Posted on Sep 13, 2009

Ad

3 Related Answers

Anonymous

  • 1 Answer

SOURCE: curtis mathis universal control code for 13 in tv cm13102

We also bought a universal remote to program a Curtis Mathis TV. We found the code by using the code search method. It works everything but the channel program feature. Does anyone know how to access that? BTW the remote is a GE 24921. Thanks

Posted on Apr 26, 2008

Ad

Anonymous

  • 3130 Answers

SOURCE: Curtis Mathis TV

Not a lot of info your giving us, but what it sounds like is the closed caption is on. Take the remote and there should be a button on the original remote unit, or the closed caption is controlled by the menu. Good Luck

Posted on Sep 05, 2007

Anonymous

  • 4090 Answers

SOURCE: Philips universal remote needs code for Curtis

Try these

Curtis Mathes
0047 0466
0016 0054
0060 0093
0145 0030
0154 0451
0166

Please rate my help++++Thanks for using FIXYA

Posted on Jun 09, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have an old model Curtis Mathis TV and cannot find the code to program my remote. Do you have Curtis Mathis codes at all?

Have you tried downloading the user manual for the TV model you have if there are codes for the REMOTE it should tell you .
0helpful
1answer

I can't access the advanced settings on my Curtis-Mathis TV

is it possible to connect my toshiba regza rv75 tv to the internet
0helpful
1answer

I have a universal remote control that I want to use with my Curtis Mathis TV. What code do I need to use to make the remote compatible with the TV?

Hello

Thee digit universal remote code for Curtis Mathis are:-
000/ 001/ 004/ 009/ 015/ 031/ 049/ 105/ 109
Four digit universal remote codes for Curtis Mathis are:-
0031 0105 0130
0004 0009 0000 0049
0109 0358 0001 0015

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
0helpful
1answer

Nedd to reset TV manually...... remote is not working

I have a curtis Mathis model number cm19102 . I have no remote. It is stuck on no more than 14 channels. Then the word line comes up on blank screen. How can I get it to get more channels
2helpful
1answer

Philips universal remote needs code for Curtis Mathis Tronics TV

Try these

Curtis Mathes
0047 0466
0016 0054
0060 0093
0145 0030
0154 0451
0166

Please rate my help++++Thanks for using FIXYA
0helpful
1answer

Lost code book need codes for curtis mathis and rca tv"s

need code for tv. lost booklet and cnt emember code
0helpful
1answer

SCREEN SIZE

Hi, As indicated by your model number the screen size is 27 inch, which is a common diagonal measurement. This TV has a standard aspect ratio of 4:3.
0helpful
1answer

Lost color on curtis-mathis tv

CHECK FOR AND REDO LOOSE SOLDER JOINTS
0helpful
1answer

Curtis mathis universal control code for 13 in tv cm13102

We also bought a universal remote to program a Curtis Mathis TV. We found the code by using the code search method. It works everything but the channel program feature. Does anyone know how to access that? BTW the remote is a GE 24921. Thanks
Not finding what you are looking for?

Open Questions:

0answers

Whirlpool Side by Side American style Fridge Freezer too hot and too cold! I have model S20D FSS10-A/D Service number 8586 161 15000 Side By side FF - and after replacing many components on the rear board 13 years ago it has been running well. However.... with a new fault I am hoping that the symptoms may allow someone to point me in the right direction. Not having a circuit diagram has been a hindrance. Over last few years the front panel inside in the fridge in my model has been developing a display fault - it started with the LED display winking out briefly about twice a second. The mark/space of time for the 'winking out' changed slowly to 50% on 50% off twice a second to eventually become just flashing on briefly twice a second and finally off all the time. However, the default settings/functioning of the FF has been working fine so didn't need to use the panel. However, can't read any fault codes that might be there I don't think that the buttons are doing anything on the panel. It has 15v supply but I don't know what supply voltage from the rear PCB should be. Then... A few weeks ago the house RCD tripped once and the fridge bulb had blown ********* stain on bulb interior and Relay RL3 was chattering randomly - I took the board out and noticed a fried circuit track where it looped thinly either side of component hole that was unused. I soldered in a bridge over the gap. Restarted the FF. From then the freezer cools to -32c and warms up to -2c and down to -32 etc.. The fridge varies in temp but does go as low as 0c and high as +9c. Alongside this, when the compressor is not running we can heard a ticking noise and identified that the compressor fan was turning slowly about ?100 rpm There's no ice build up, the freezer to fridge air louvres are opening and closing when you switch the FF on, and do seem to open and close at different times. The evapourator fan seems fine as does the compressor fan, the bottom of the fridge is dust free and the rear panels are all on to allow proper cooling of the condensor motor. I pulled the board again, checked all the capacitors I have a slightly different board to many and all the capacitors I had used from one brand have failed again. I took all the caps out and measured them. C6, C16 should have been 0.68uF and were in the order of a few nF C14, 26, 27,28 should have been 0.1uF and were 0,.6nF, 2nF, 10nF and 38nF respectively. All other film and electrolytic capacitors were within tolerance. I replaced all the faulty caps thinking that I had found the display problem because you had told me in the past that C6 and C16 relate to the front panel and the cooling issues and fan issues but NONE had been cured :- I checked the continuity to the front panel of all connectiions and they're fine. Also checked the 2 electrolytics on the front board. So I am at a bit of a loss. I have checked the zener diodes in situ and all have about 6v forward voltage drop I cannot find a replacement board due to different connectors on my unit - so unless I can fix we will have to fork out for a new FF :-

396 views

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Cindy Wells

Level 3 Expert

6559 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...