Question about Logitech LX5 Cordless Optical Mouse

1 Answer

Hi my LX5 stopped working on some of the surfaces. It was fine the other day and all of the sudden it only works fine on paper. On desk or mouspad i've been using for years the pointer barely moves. I cleaned the optics, but it did not help. Next problem is with the batteries. Whenever I put the newly charged energizer lithium in it says that the battery level is critical. It was fine before as well. Could you please advise?

Posted by matekth on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Don't know about the different surfaces problem, but the batteries...I had similar problem with duracell charger/rechargeables and my digital camera. I bought new batteries, charged them up and they didn't last long at all. I finally bought a brand new charger and batteries and they work great as they should. Maybe the charger is bad or try cleaning the charger battery contacts with pencil eraser to see if that helps. Also, some devices work best with "normal" batteries.

Posted on Sep 12, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

The top of my desk is not smooth and it makes writing difficult. What can I do?

You can either buy a plastic/glass cover to fit the top of your desk and cover the surface, or you can fix it yourself with a little sanding and varnish. Here's a site that can take you through the necessary steps.

http://www.ehow.com/how_7862611_can-seal-top-writing-desk.html

Aug 15, 2012 • Furniture
1helpful
1answer

I can not run 192.168.01 on my computer to change it to ppoe,i have a di-524 dlink and a motorola mstatea dsl modem,the other computers desk top and laptop can connect to the internet,but the one these...

you should type in 192.168.0.1.
In your request you have:



i can not run 192.168.01 on my computer to change it to ppoe,i have a di-524 dlink and a motorola mstatea dsl modem,the other computers desk top and laptop can connect to the internet,but the one these componets are hardwired to cannot.has worked fine for years but stopped suddenly!!!!!!!!!!!

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

0helpful
1answer

Microwave oven suddenly stopped working, no display,not outlet

Hi, you must check the inside fuse. If is burned out, please consider that something happened, you must check further beyond to find the causes.
0helpful
1answer

One surface element went dead.

Make sure that element didnt come unplugged. Just push it in firmly and it should be fine.
Mar 18, 2009 • Cooktops
0helpful
1answer

HP Desk Jet 3320 paper won't feed any more

Hi , I think the belt which moves the cartridge is worn out or it could be something to do with the sensor.check both and should work fine.
1helpful
1answer

Dishwasher stopped working..!!..!! please help

Hi crystal245,

I'm Harvey the Master Plumber.

Your problem is: GE Nautilus Dishwasher suddenly stopped working. NOTHING!! it was fine one day then went kaput the next. I checked the plug in and the circuit breaker but still NOTHING

I run into this often. Ends up being loose, broken or burnt ellectrical connection in d/w junction box most of the time. It's under the d/w behind the kick plate on the right or center. Turn the power off first and remove the wire nuts. Replace wire nuts and/or repair wire ends as nessessary. Beyond that you're looking at a bad control board or failed connection in the unit.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber
Sep 09, 2008 • Dishwashers
0helpful
1answer

Microsoft standard wireless optical mouse troubleshooting...

alright The Optical Mouse works on the "reflection" principle.
If it is only working on the T-shirt,the T-shirt Must allow it to read the Light Reflection with more details compared to the other shiny or smoother surfaces.
so,make sure you use some surface close to the T-shirt's.
and as you have been use that mouse directly on the deck surface, the little LED must have goten Dusted or the plastic arround the LED(light).
Hope that helps...
If the Mouse is in warranty **** any replacement if possible underwarranty.
0helpful
1answer

Only Picture in Picture Works...????

Its possible some of the surface mount capactors has failed on the pip board is so the unit will need to be replace or repaired.
Not finding what you are looking for?
Logitech LX5 Cordless Optical Mouse Logo

117 views

Ask a Question

Usually answered in minutes!

Top Logitech Computers & Internet Experts

Ekse

Level 3 Expert

13435 Answers

Mehandi Husain ...

Level 3 Expert

1654 Answers

k24674

Level 3 Expert

8092 Answers

Are you a Logitech Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...