Question about JVC Televison & Video

1 Answer

Hello, I need some help diagnosing my TV, it will not turn on?

I have a JVC AV-56WP74, When I try to turn it on The power light blinks blue and will not turn on. Any idea what the problem could be?

Posted by wperkins on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

Hi the problem you have is your convergence ic outputs part #stk 393-110 ther located on the front of tv chek for burning resistors on the same board

Posted on Sep 11, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

OK so my jvc av56wp74 will turn on with a green pic then turns off and the blue light in front blinks


it sounds like u need a new lamp with housing if that dont work than its your main board on the inside of tv. but i would try the lamp first

Aug 26, 2013 | JVC AV-56WP74 56" Rear Projection...

2 Answers

I have a JVC AV-56Wp74 Blue power light on the front keeps blinking and the screen is black & makes a popping sound


There are a couple of common problems this model has--one is easy to confirm.


How handy are you if I tell you to disconnect the convergence board to see if it is your problem?

The blinking blue light means the set is in protective shutdown, and I know a fairly easy way to see if it is your problem and how to fix the set if it is.

Let me know if you need help--I am here to help people and l know a lot about this set.

SD TECHbd54bcc.jpg

Dec 16, 2009 | JVC AV-56WP74 56" Rear Projection...

1 Answer

TV is not responding


Your description does not tell me very much---You have a JVC AV-56WP74 and it does not work?

If the power light up front which is usually blue in color just blinks I can tell you a easy way to know exactly what is causing this problem.

If when you turn the set on the blue power light just blinks---that is short protection--most of the time a fairly cheap fix----LET ME KNOW WHAT YOU ACTUALLY HAVE GOING ON.

I am here to help---I do this here for free.

Do not hesitate to ask me for help or advice.

Regards, SD TECH

Oct 31, 2009 | JVC AV-56WP74 56" Rear Projection...

1 Answer

JVC 52 " Rear Projection TV Blinking Lights and no Picture


You need to replace the power supply board. The new ones have a bigger heat sink - obviously JVC knows about the problem because they made the new ones bigger. It cost $250 from JVC and I installed it myself - took about 3 hours to do. If you are not tech savvy call a repairman. Hope this helps.

Jul 17, 2009 | JVC AV-56WP74 56" Rear Projection...

1 Answer

AV-56WP74


Could be shorted convergence chips. There are two of them in the TV. If they short they will shut the TV down. One quick test is to desolder both of them...then power the TV on..if it fires up the chips were shorted and would need to be replaced. You can get a complete kit from www.TvRepairKits.com

Mar 11, 2009 | JVC AV-56WP74 56" Rear Projection...

1 Answer

After a power surge My Jvc Av-56wp74 big screen Tv won't come on.


 Try this: Works with most crazed computer based devices.Remove power (unplug) unit for 1 minute then plug in

Dec 14, 2008 | JVC AV-56WP74 56" Rear Projection...

1 Answer

TV Has no pitcher


you could have a shorted tube Green disconnect CRT board from green tube if set stays on tube is shorted also check video ic on crt board.

Dec 07, 2008 | JVC AV-56WP74 56" Rear Projection...

1 Answer

Please help...


you can get the service manual at the following link and they will help you diagnose what the problem is. Heres the link
http://servicemanuals.vstore.ca/

Nov 24, 2008 | JVC AV-56WP74 56" Rear Projection...

1 Answer

Tv comes on then goes black power light blinks on and off modle # JVC AV-56WP74 56


Check the coils on the main board. Coils mean round ferrite donuts (1 inch or less) with copper wires on it. I have seen this come out.
if not check convergence amp ic's
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Dec 20, 2007 | JVC AV-56WP74 56" Rear Projection...

3 Answers

Tv wont power up makes a noise but no picture


Your power transformer is likely shot. It'll cost at least $200 to have it replaced. Someone can come to your house to diagnose it. Usually costs around $65.

Nov 03, 2007 | JVC AV-56WP74 56" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76407 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...