I need user manual for Indesit 1300 WIE 1375 washing machine

My best advice: contact INDESIT

http://www.indesit.co.uk/indesit/entryPoint.do

You can contact CONSUMER SERVICE through this webpage:

http://www.indesit.co.uk/appliances_i/contact.do

In pages 15 & 16 of user's maual you can find phone contact numers so you can ask manufacturer about getting a service manual

You don't have the manual?

http://www.indesit.co.uk/indesit/_pdf/manuals/19504297004_UK

Aditionally, it might help you how to put clothes in your washing machine.

please check the manual at this site could be of help.
User Guide Indesit WITL 105

www.theusermanualsite.com/ex/mfg/.../indesit/.../manual_request

You can download a user manual for your m/c, but not a repair manual, Go to>
www.indesit .co.uk
Follow the links. To remove the spider, remove the rear panel, remove drum belt, undo drum pulley, you may have to heat the screw holding the pulley,undo all screws that you can see holding the spider to drum rear.
Withdraw spider, you may have to use some force to pull it off.
Fit new bearings or spider, and reassemble..
plz rate this solution.

Have you checked your plug and the connections, also your socket.
If no joy, then door lock probably faulty.

Hi,
There is a fault on the program board. It more than likely needs a replacement.

Hi,

This is a pressure switch error.
It still thinks the machine is empty because the switch sees no pressure (simple dip tube).

But this may be as simple as a vent hose come off.

To check,
First isolate supply, then remove screws at top rear of the machine.
Slide the lid rearwards, and remove.

The small hoses should go to the drawer area, and the pressure switch will sit at the end of one of them.
If there are any rips or damage to a hose it need replacing.
Check all hoses are where they should be.

If this doesn't work, please ask here again so I can troubleshoot further.
Thanks for using Fixya!

try here http://www.indesitservice.co.uk/hs/pages/manual/manualSearch.do

Indesit washing machine error code 3 (F03) On certain Indesit washing machines, if the on off light is flashing 3 times, with a slight pause, followed by flashing a further 3 times, or if it is didplaying F03 you have an error code that is explained as follows -
NTC fault - check Thermistor and module connections.
The NTC is the thermistor, which is a modern-day thermostat. It’s inserted into a tube in the heating element and is filled with heat sensitive crystals that change their electrical resistance according to their temperature. By knowing what electrical resistance the crystals have at given temperatures they can tell the water temperature.
With this fault the NTC is either faulty, or there’s a dodgy connection to or from it or there’s a connection problem where it connects to the main PCB.
It’s not something you can easily fault find yourself unfortunately, apart from if there was an obvious broken wire.

Sure you can. Click on "Indesit" or "washing machines" (below FIXYA) on this website, type in your model No & search. You will get a shortlist; click on your model,below the page u will get Manual/Guides. Click on the blue, you have your manual on line.
And dont forget to rate me on this great site.