Secured on network

To connect to your wireless router, the router's wirelesssettings needs to be configured with the SSID, encryption etc. and also thewireless cards in all the laptops/computers needs to be configured with theserouter's wireless settings. These settings prevents unauthorized access to your wireless network and Internet. Then the laptops/desktop computers can communicatewith your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down andput it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Hi,

In order to find the wireless security password of your Linksys wireless

follow these setps

1. Open up the internet explorer in the computer in which you are online and clear the address bar and type in the number 192.168.1.1 and hit enter.

2. You will be logged into the Linksys router setup page .

3. In router's setup page, "username" is always blank. If you have set the password, type the password. The default password for linksys setup page is "admin".

4. There under the wireless settings you will find the security password to connect the wireless computer.

Good Luck!

Thanks in Advance!

With Regards,

My friend,


Please reset the router by pressing the reset button for at least thirty seconds.

Open the setup page of the router with 192.168.1.1 from Internet Explorer.

Username=leave this blank.

Password=admin

Router setup page will be displayed then.

Click on the basic wireless settings .

Give the network name(your choice) and channel =6.

Under wireless security settings .

Click on the security mode should be WPA.

Put a security key.

Save settings.


It will start working wireless .

Saved your 39.99 $


Regards:-
Amit Awasthi

You will need to access the setup page of the Linksys router to get the wireless security key.

On a wired computer's browser, type 192.168.1.1 in the address bar.

By default, leave the username blank, and the password is admin.

Once in the setup page, go to Wireless > Wireless security. You will see the network key. Take note of the key because this is your wireless security key to use on your wireless computer.

I hope this helps!

goto router ip

192.168.1.1
admin login

admin :blank
password:admin

wireless setup
wireless security
enable wep wpa
wep 10 digit
wap 8 alpha numeric

You need to login into your router GUI for that.

Hi Friend,
Please follow the below mentioned steps to find the Network

Step 1: Connect the Computer to the Router

Step 2: Open an Internet Explorer and type 192.168.1.1 and Click on Enter button in the keyboard.It will ask for Username and Password

UserName: Leave it Blank (No need to type any thing)
Password:admin

Step 3: Now you will be able to see the Router Setup page

Step 4: On the top of this page click on Wireless and then Wireless Security

Step 5: You will be able to see the Security key or Passphrase,this is your network key

If you have any Clarification please feel free to reply

Regards,
Ayyasam

Access the router setup page from the working computer you can do this by typing 192.168.1.1 on the address bar of your internet explorer and that will ask you for a username and password leave the username blank and password is admin if admin did not work type your commonly use password, Once you're on the setup page you can go to Wireless tab and then Wireless security and there enable the security that you want to use......

When you connected, did it ask you for a password? If not then it's obviously unsecured. Here's how to fix that... i have the same router.
On XP... open internet explorer... in the address bar, type in: 192.168.1.1

On vista.... click start menu...click on network...right click on router and select properties. Next, click on the "Network Device" tab at top of the new window. You will then see "Device Webpage"... click on the ip address to the right of that underlined in blue. It should ask you for a password... if you haven't set one manually the user is admin and the password is also admin. I recommend changing that to a manual password ASAP. Ok, after logging in, now you have the router's set up page in your web browser.
To make it secure:
On the set up page you now have open... you have a few selections that act like tabs: Setup, Wireless, Security, Access Restrictions, etc... Click on Wireless. After clicking on that, you have some tabs underneath wireless you can click on now.
Those selections should be: Basic wireless settings, Wireless security, Wireless MAC Filter, etc... Click on Wireless Security. There you should see disabled on the first drop down. Pick a WEP, WPA or whatever you prefer. I personnally use WEP with 64bit 10 hex and for the password, i use a 10 digit number.
After you have set up your password and security, click save settings at the bottom. After it's done processing the save, you can close the web browser. You are good to go now.
By the way, I recommended changing your password to access the router's set up page. Make absolutely sure you save that username/password in a safe location. If you forget it, there is nothing linksys can do to help you. I know from experience unfortunately.
Hope all this helped... Good Luck

Just go to www.linksys.com/kb select the model no.of your router and you will get step by step help to setup your router. you can also call linksys tech. support and i am here to solve your problem.
if this is a new router then connect it to your system through ethernet cable and go to internet explorer and type 192.168.1.1 at the add. bar it will prompt for the password. leave the user blank and type admin in the password linksys setup page should open. now click on the WIRELESS TAB and on the basic wireless settings change the defale SSID NAME to your girlfriend's name and also click on reset security and click on save settings. reload the page and now go to wireless security tab and select WEP in the security tab. now type 10character password in the KEY 1 field directly and click on SAVE SETTINGS and that's it. Now when you connect to your network you will have to enter your 10 char password in your COMPUTER and it should work fine now. call tech support or go to the above link for further assistanceRICHARDM69