Sorry, never read the section lol.
netgear wgr614 default ip is 192.168.0.1. so connect via a wired connection, and open http://192.168.0.1. got to wireless settings and change the key.
SOURCE: How to change wep security key
hi, sometimes if changes was done you need to recofingure you're wireless all over especially if the key has been saved on your pc to be rembered, you could actually reset your router and configure it by going to your routers gateway by doing an ipconfig you'd be able to see the gateway..launch it in your browser n youd be able to access the configuration of the versalink...i could actually give you more detail though im in a hurry, better you call your isp provider or bellsouth now att since westell versalink are manufactured by them and they give great tech support for connectivity problem...
SOURCE: NETGEAR WGR614v7 Network Security key
Hi, you need to connect to the routers admin pages to configure the wireless settings and security. Check out this page:-
http://kbserver.netgear.com/kb_web_files/n101676.asp
When you get to step 6, click the WPA-PSK security setting and it will give you a box to type in a password of your choice, make it memorable but difficult to guess, so a mixture of numbers and letters. I think its a min of 8 characters.
Hope this helps..
SOURCE: i need a network security key for my wireless
its on ur modem in brackets
should be 10 digits long
SOURCE: Forgot my security password (network key)I need to
Logon to your router from your computer using your browser and going to http://192.168.1.2/. If it wants a username, the default username is blank and the default password is either blank or "password".
The Belkin management tool will come up. From there, go into your security and look to see if your passphrase is visible. If it is, you're good to go. If not, you can change it on that page save it and close out.
Don't forget to change the passphrase on any wireless devices you are using connected to the Belkin wireless router.
264 views
Usually answered in minutes!
depends on your router really, could you post some more deatail such as router make/model. in general a reset will default it to the security key printed on the bottom of the router or back to being unsecured
×