First of all, what is your router's firmware version? if it is 1.25, well there's no update as of this time. if lower than 1.25, here's where you can download the firmware http://www.dlink.com/products/?tab=3&pid=DI-624&rev=DI-624 .
SOURCE: upgrade firmware
Step 1. Create a Folder on the Desktop Screen: From a blank spot the Desktop Screen, press and hold the Control key on the keyboard and click the mouse button. Release the Control key, click New Folder, and name it firmware. Step 2. Retrieve Firmware from Website: Click link below and download file to the folder created in step 1. Download DI-604 Firmware here - http://support.dlink.com/products/view.asp?productid=DI%2D604#firm Download Di-614+ Firmware here - http://support.dlink.com/products/view.asp?productid=DI%2D614%2B#firm Step 3. Upgrade the Firmware: A. From the Main Desktop Screen, launch Internet Explorer or Netscape. B. Type 192.168.0.1 in the Address bar and click Go. C. For the User ID, type admin and click OK. D. Click Tools on the top and then click Firmware on the left side. E. Click Browse>Desktop>firmware, double click di6xx_firmware_203.bin and click Apply. Wait for approx. 15 seconds or until the M2 light stops flashing on the DI-6xx unit then click Continue. F. This takes you back to the Tools page. Check the Current Firmware Version on the Tools page to confirm that the firmware loaded successfully.
SOURCE: upgrade firmware
Step 1. Create a Folder on the Desktop Screen: From a blank spot the Desktop Screen, press and hold the Control key on the keyboard and click the mouse button. Release the Control key, click New Folder, and name it firmware. Step 2. Retrieve Firmware from Website: Click link below and download file to the folder created in step 1. Download DI-604 Firmware here - http://support.dlink.com/products/view.a... Download Di-614+ Firmware here - http://support.dlink.com/products/view.a... Step 3. Upgrade the Firmware: A. From the Main Desktop Screen, launch Internet Explorer or Netscape. B. Type 192.168.0.1 in the Address bar and click Go. C. For the User ID, type admin and click OK. D. Click Tools on the top and then click Firmware on the left side. E. Click Browse>Desktop>firmware, double click di6xx_firmware_203.bin and click Apply. Wait for approx. 15 seconds or until the M2 light stops flashing on the DI-6xx unit then click Continue. F. This takes you back to the Tools page. Check the Current Firmware Version on the Tools page to confirm that the firmware loaded successfully.
SOURCE: D-Link DI-624 wireless router is not working after firmware upgrade try
Try to unplug the router and hold in reset button for 30 seconds see if that works, you probably did that already, But if you can get your computer to respond you should be able to open software Bios. and do your firmware update from there. If not I believe a hard reset is with the router plugged in and holding reset button for 30 seconds, I don't know I sure hope that resets it for you. Thanks take care
SOURCE: I can't connect to wireless
looks like a firmware corruption. try running a firmware update from http://support.dlink.com/products/revision.asp
119 views
Usually answered in minutes!
×