Lexmark all-in-one x4690. I am trying to set it

click here to download driver

You may need to uninstall the existing X4690 driver first before installing it's driver for Windows 7. Follow the instructions in this artricle on How to Uninstall Lexmark Printers. Once driver is uninstalled, reboot pc when prompted. Reinstall using the driver for Windows 7 from the Lexmark website at:
- Lexmark X4690 Driver for Windows 7 32-bit - Lexmark X4690 Driver for Windows 7 64-bit
Hope this helps.

The printer driver for Windows XP is available for download in the Lexmark website. Just click on this link: http://bit.ly/cS9dKN . On the page, look for "Driver for Microsoft Windows 2000, XP, Vista & Windows 7." and download and install the software. Hope this helps.

Hi. Hope you got it working fine now on your Windows 7. If not, go to Start Menu > Devices and Printers > right click on the Lexmark print object > Troubleshoot. Make sure the printer is on and is still connected to the computer via the usb cable.

please you are properly instoller a original printer driver cd progremmes. and delold printer is current user printer name and number aply is ok to try again and chack befor purchased.

I switched the usb cable

go to lexmark .com downalod basic driver for your steym vista new driver that fixs alot issues they had form cd drivers k download latest driver from lexmark.com your model for vista then try unplug it also during set up toi it ask u to install usb cable k

Megan-
Did you just plug the printer in, or did you go through the installation process first? Many printers (and I believe Lexmark is one) require that you install the software *before* hooking up the printer.

If you're not sure, delete the printer from your Windows printers folder, then disconnect the printer. Get your original software CD out, and reinstall the Lexmark package and drivers.

After the installation is finished, you should be prompted to "plug in your printer now". At that point, you should be good to go.

Hope this helps - please remember to rate my answer :)

hi!!

try to download your Lexmark X2250 printer
here vista driver

or replaced the usb cable

Looks like I've cracked it [Touches wooden desk]. Need a USB to IEEE 1284 36-pin Parallel Printer Cable, like the one I received today (ordered yesterday from www.cables2u.co.uk). First, connect it to Z11. Turn on Z11 and boot up Vista PC/laptop. (I run Vista Business on my laptop.) Connect cable to computer. Message appears "Installing device driver software". Click it for status. 'Found New Hardware' box appears. Click 'Locate and install driver software'. A message appears "Error loading LXADSUI.DLL. Specified module could not be found". Click 'OK'. Message appears saying driver software installed successfully. ["Yeah, right ..."] (Have faith, folks!) Now, click Start, then Control Panel and double-click Printers. Right click on Z11 and click on Set As Default Printer. Right click on Z11 again and click on Properties. Check on Ports tab that Port USB is ticked for Z11. On Cartridge Maintenance tab, check right cartridge is showing. If not, click 'Install/Change Cartridge' and follow instructions. Then 'Clean Print Nozzles' and 'Align Cartridges'. Check settings on the other tabs in Properties look OK and try printing a test page! It looks good to me!