Bumper bar for quinny speedi

Hi Maria

If you have a 2011 model Zapp Xtra seat unit the bumper bar is not suitable to use on it.

The bumper bar accessory is only suitable for 2012 model Zapp Xtra seat unit onward. On the back of the seat unit there is a manufacturing sticker which shows date of production, which will tell you if your seat is suitable for using bumper bar accessory.

Hi

The bumper bar accessory simply clicks into place on the seat frame of the Quinny Zapp Xtra 2012 and 2013 model.

It is not compatible with 2011 model Quinny Zapp Xtra so please confirm the unit you have is compatible.

If you confirm it is compatible and still have difficulties please contact your retailer.

Hi

Quinny cannot advise the use of non-official Quinny products with the pushchair.

The Zapp Xtra bumper bar is not compatible with the 2011 model Zapp Xtra seat unit as modifications were made for the 2012 model seat unit to be compatible with the bumper bar.

Hi

Quinny do not produce a bumper bar for the standard Quinny Zapp. We cannot advise use of non-Quinny products with your Quinny Zapp.

Hi

No the bumper bar accessory is not compatible with Quinny Zapp Xtra 2011 model.

Bumper bar accessory can only be fitted to 2012 and 2013 model.

The Quinny Buzz bumper bar is only for the Quinny Buzz and will not fit a Quinny Speedi.

Good Evening

Please contact your local Quinny retailer or alternatively go to www.quinny.com and select your country then use the "Contact Us" tab to connect with Quinny customer services in your country.

The quinny speedi should come with the adaptors to fit the bassinet (the quinny dreami) Once you remove the pushchair seat unit by undoing the clips and undoing the velcro the fastenings you then need to remove the 2covers or bumper bar(depends on model) above the quinny logo on the pushchair frame. You do this by pressing the silver buttons to release them and then they should slide off. You then replace these with the adaptors for the carrycot. These slide into position until you hear a click. The carrycot is then place onto these(again it will click on) parent facing. To remove the carrycot you then press on the silver buttons on the carrycot unit and lift off using the handle in the carrycot hood. HTH

Hi,

There is no bumper bar for the Speedi, unless you have one of the current 2010 UK models.

Hope this helps.

Hi I've just bought a new one from the UK distribution company Dorel UK. They are contactable on 01842 763281 and cost £9 plus £3.99 post and packing. Hope this helps