I cannot find my manual to get programming code for my zenith tv

Programming procedure

https://voxxintl.zendesk.com/hc/en-us/articles/225309147-Programming-the-RCA-RCU4GLW-Niteglo-Remote-Control

Zenith Remote Codes
Zenith Universal Remote Codes Zenith Universal Remotes Codes for all devices: 101, 142, 149, 177, 201, 224, 225, 229,
237, 153, 154, 172, 401, 460, 461, 498, 501, 502, 521

In reality, the days of Universal Remotes are over. People buy remotes SPECIFICALLY for the set you have from places like this. A direct copy aka, a facsimile copy.

https://www.replacementremotes.com/zenith/sb1327w-tv

..

Digit Zenith TV Converter Box Remote Codes
212
254
267
357
454
457
557
657
757
857
955
957
991

4 Digit Zenith Converter TV Box Remote Codes
1415
9910

5 Digit Zenith Converter Box TV Remote Codes
01414
51415

Here is an online manual. http://www.manualslib.com/manual/334599/Universal-Remote-Urc-R6.html

Hello

[1] Switch your television on

[2] Point the remote control towards the
television

[3] Press and hold the TV POWER button, and

then enter the two-figure code in the table

to the right that corresponds to the brand of

your television by pressing the appropriate

number buttons.

If your television is compatible with the remote

control, it will switch off.

The remote is now programmed to operate
the TV.
The code for Zenith TV is [TV POWER + 63]

I couldn't find the manual for the remote you specified, however, as long as it is a Philips remote, you should be able to use any manual to find the code. If you know how to program the remote but just need the codes, you can get the codes here:

http://www.p4c.philips.com/cgi-bin/dcbint/get?url=/sca/sca/091116/091116160956_30167.pdf&ofn="H15022.pdf"

Hi,
This may be of help for Zenith codes:

http://www.thompsontv.com/zcodes.html

Zenith Product Codes

TV Mode Zenith Code 101 - VCR Mode Zenith Code 201 - Cable
Mode Zenith Code 353 - AUX Mode Zenith Code 401.

Programming Codes---
TV - 101 149 175

Check the manual for your Zenith; many of the Zeniths (and many others) have a 'scan' mode you can call up, in which you can repeatedly press one key (^ for example), then the Power Button. That will force the remote to set every code it has available, step by step.

If you no longer have the manual, you may find it here or several other sites that offer these.

The BNZ110 is designed to be for Zenith by default. If it gets changed and won't work, then take the following steps.
1. Remove the batteries.
2. Hold the power button down for 10 seconds.
3. Reinstall the batteries.

This works for many Zenith TV's.

Here are the codes for Zenith if that does not work.

713 502 606 409 710 701 507 714 405 712 015 916 008 002 115 224 324 126 326 826 228 430 632 435 437 903 407 505

Here is the response from LG/Zenith customer support:

Unfortunately, this remote has very limited programmability. The manual is correct.

INSTRUCTIONS: Controlling other TVs with the remote You can control the sound level, input source, and power switch of non-LG TVs as well. If your TV is listed in the table below, set the appropriate manufacturer code.

1. While holding down TV POWER button, press the number buttons to select the manufacturer code for your TV (see the table).
2. Release TV POWER button. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer Code Number
LG/GoldStar 1 (Default), 2
Zenith 1, 3, 4
Samsung 6, 7
Sony 8, 9
Hitachi 4

For further information or troubleshooting, you may contact us at 800-243-0000 for LG Customer Service assistance. An agent will be glad to assist you. Please feel free to contact us with any additional questions or concerns. Thank you again for contacting LG Electronics.