Belkin Installation CD wont install any software for my wireless router

There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

Sir Lost My Installation cd, Belkin, Wireless Router Model : F5D7231-4, FCC ID : H8NRT2406W. Pl Provide Software

Hello
It shows that the software does not installed properly, or you might select diffrent OS during installation, re-installation with proper inputs is recommended,
Good luck, do rate the solution if got help

There is an easy install wizard download here on Belkin's web site.

http://www.belkin.com/support/article/?lid=en&pid=F5D7230-4&aid=5096&scid=0

First of all you have a wireless "N" adaptor running on a router set for 802.11g. You need to have the same router as the adaptor, "N".

http://www.belkin.com/support/search/?q=F5D6231-4

Click the link to the download page

Don't worry the router does not have a driver. Just run the network wizard in windows. And set up a new connection you will see.

It sounds like you don't have the units connected properly. Make sure you have a cable(wired) from your ethernet card on your pc connected to a wired port on the router. Then plug your router from its yellow port into the modem. Make sure your modem is connected to its Internet interface. Plug in your modem and wait 60 seconds for it to power up. Then power up the router.
At this point you should be able to access the router with the supplied installation CD. Run the setup assistant and it will define your wireless network. When you are through you should have internet access through the wired network. When you are finished you should be able to use the wireless network assuming you have the card installed correctly and the software for the card correctly installed.