S630 Do not speak English very well and memory card of the Samsung Digimax S630 is not Compatible my HP 1350 PSC For me to copy the images for computador.Dont have cable USB. What to do?Thank you.Adriana

You may delete them one by one on the Camera: Go to "view" and delete
Or You may delete them all by browsing to the menu > Format memory card.

Problem with the actual cable, the USB port being used on the computer, or the actual connection on the camera itself. The quick fix would be to take the memory card out of the camera and purchase a cheap memory card reader that you can put the card into and the PC will read that fine. From there you can copy the images over and even delete them. It reads like a jump drive.

Prices start about $10.

In the Setup menu there should be either a "Backup" or "Copy" entry that will copy your pictures from internal memory to the memory card. This does a copy, not a move, so you'll have to delete the pictures afterward (after you safely transfer the pictures to your computer, of course). The operation can also take a while, so make sure your batteries have a good charge.

In PLAYBACK menu there's an option to "COPY TO CARD". Select this and it will copy any images stored in your camera memory to your SD card.

Have you tried another memory card?

Some devices can read SD but not SDHC. If your memory card is 1 or 2 gig, it's SD, if it's larger, it's SDHC which is not backwards compatible with SD.

Based on the age of the PSC 1350, I would bet it's a SD-only device.

Have you tried to format the memory card in the camera?
Try that, follow the directions in the manual on formatting the card. That should work.

I would check the HP forums as a more likely place to find an answer to this question...check here

See if there is a copy feature in menus where you can internally copy from internal memory to card-kodaks and some other manufs offer this feature-i would offload internal pics w/usb to computer and then just start using new card-get a memory card reader also and you can put from comp back to memory card w/reader-no need normally to format new memory card-just don't format internal or you will lose pics

If you transfer the photos to your computer from the camera, you should be able to save to another memory card. I can't say whether or not the photos on the new memory card will show up on your camera since there may be certain requirements to display on camera screen.
Plug your camera into the computer USB or insert old memory card. A box should pop up giving you the option to view files. Copy and Paste (or Drag) selected photos to a specified folder on your computer (Like My Pictures in My Documents). Insert new memory card. Copy and Paste (or Drag) selected photos to the drive for your memory card.

normally a gentle 'push in' releases it allowing it to pop up. Except Compact flash that have a release button near by What type is yours.