Question about Mitsubishi Televison & Video
SOURCE: mitsubishi wd-62825 dlp
The WD62825 has a Digital Module located on the left side of the chassis looking at it from the rear of the set. It's housed in a metal box that can slide out of its holder after removing the trim screws.
The module has its own power supply board and there are a group of 16v/1000uf caps on that board which commonly fail causing the constant flashing standby light. Further back on the module is a small board about the size of a matchbook called the E2P module. Its SMT (Surface Mount Technology) caps also commonly fail which can cause the same symptoms. Techs can tell whether the E2P has failed by simply removing it, hooking the DM back up and trying to power the set. If it powers on the picture won't be much good - but at least you can tell what's keeping it down...
Back to the caps on the pwr board. If they've failed they usually will buldge visibly on top. And ESR is almost not necessary. In any event that's the nuts and bolts on this model.
Is it a job for a layman? Yes and no - you might strongly consider a tech if you don't feel comfortable removing all the connections that the DM has with the signal board. There are about six - multi-pin - wired connections to unplug and then sliding the DM out of the unit and carefully removing the screws and latching to take the DM top cover off...
Hope this helps.
Posted on Nov 10, 2007
I have the same tv and the same problem happened to me (Actualy twice). It turned out to be the color wheel motor. thats what the clicking noise is.
Posted on May 15, 2009
SOURCE: cannot turn tv on
Check power supplly make sure its not the fault in wht this will not turn on.
Unplug tv from wall wait 30 secounds and plug back in.
If that does not work you will need to have someone look at the powersupply.
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/edwy_1a56970cf1ea4620
Posted on Jul 01, 2009
Yes... from the moment the lamp is put into service, it begins to deminish in brightness. You should order a replacement lamp to have on hand.
Posted on Mar 15, 2010
Tips for a great answer:
Feb 25, 2015 | Mitsubishi WD Televison & Video
Apr 06, 2014 | Mitsubishi WD-Y57 57" Projection HDTV
Oct 02, 2013 | Mitsubishi WD-73827 73" HDTV DLP TV
May 18, 2017 | Mitsubishi WD-65735 Television
Nov 30, 2012 | Mitsubishi WD-65638 65" DLP HDTV
May 08, 2012 | Mitsubishi TV Lamp 915P049010 for WD-52631...
Oct 18, 2011 | Mitsubishi WD-60C9 60" DLP HDTV
Oct 08, 2011 | Mitsubishi WD-60737 60 in. HDTV
Mar 05, 2011 | Mitsubishi WD-73827 73" HDTV DLP TV
52 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: