Question about Roland Audio Players & Recorders
You need a D.I. (direct interface) box. Most have XLR to 1/4" . You have to go from the 1/4" to your size jack. Remember your taking a low impedence device to a high impedence input thats why you need a D.I. you just can't make a cable to do that. Also I think you mean a 3.5mm jack.
Posted on May 06, 2009
Pin 1= ground/shield, Pin 2= hot(+ve), Pin 3= cold(-ve). Just remember if you make a cord like this you can expect some signal loss.
Posted on Oct 19, 2009
SOURCE: hello my roland street cube
That is the first thing to check. They are most likely inside the circuit board. Remember to replace them with the same voltage and amperage ratings.
Posted on Apr 30, 2011
SOURCE: Hi, I bought the Shure Beta
That will not work. The Beta 87H/C already has a preamp built into it. That preamp requires phantom power. The MX1BP is another preamp, so you would not need it, due to the preamp that is built in.
If you do not have phantom power available, then purchase an external phantom power supply.
Posted on May 04, 2011
Testimonial: "Solution is in fact one correct way to solve the problem"
Tips for a great answer:
Jun 04, 2014 | Bluebird Microphone
May 14, 2014 | AKG Perception 120 Microphone
Apr 19, 2014 | Behringer C-1 Microphone
Nov 09, 2013 | CAD Microphones GXL2200 Professional...
Sep 29, 2012 | MXL 990 Professional Microphone
Aug 23, 2012 | CAD Microphones GXL2200 Professional...
Jul 03, 2011 | Behringer XM8500 Professional Microphone
Apr 18, 2011 | Shure MX1BP Microphone
Mar 19, 2010 | Samson CO3 Microphone
Jan 11, 2010 | AKG Perception 200 Microphone
43 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: