Can I download the instructions that come with the new device?

To connect your new Alexa 10 device to the Alexa app, you can follow these steps:

1. Make sure your device is plugged in and turned on.
2. Download the Alexa app on your mobile device. The app is available for both iOS and Android.
3. Open the Alexa app and sign in or create a new Amazon account.
4. On the app home screen, tap on the menu button (three horizontal lines) in the top-left corner.
5. Tap on "Settings"
6. Tap on "Device Settings"
7. Tap on the "Add Device" button.
8. Select your device from the list of available devices.
9. Follow the on-screen instructions to connect your device to Wi-Fi.
10. Once the device is connected to Wi-Fi, you should be prompted to register the device with your Amazon account.
11. Follow the on-screen instructions to complete the setup process.

Once you've completed these steps, your new Alexa device should be connected to the Alexa app and ready to use.

Step by Step Manual Help - Download the Smart Alexa Setup
Ad·https://www.myfirestick.com/
Setup your new Device with easy instructions. Connect with Alexa Skill to use smart lights. Smart Device Alexa setup download for phone, computer & tablet. Safe Download. Complete Manual Setup. Plug in your device. Free Setup.

and videos as well

https://www.google.com/search?q=connect+my+tablet+to+Alexa

..

Usually you have to go to the manufacture web site and support or downloads, download most current maps save on computer and use that file to load on device. Some may charge for this upgrade. Follow their instructions for installing the new software.

has to be turned on through control panel

start

control panel

bluetooth icon

follow instructions

Hello there,
http://download.tomtom.com/open/manuals/vialive/refman/TomTom-Via-LIVE-en-GB.pdf
click on the link above to be able to download the instruction manual for your tom tom gps device.
Goodluck. Elect_Comp

Hi,to solve your problem please follow the instructions .

Hold down the volume button and the power button for several seconds the ARCHOS goes into a restore type mode.
connect the archos to your computer with the usb cable .next copy and paste the downlaoded firmware .aos file onto the aarchos device .
your archos device will be detected as a mobile device in windows explorer.double-click on the device to see its "internal hard driver.open this internal hard driver icon and you will see the various archos folder inside..paste the update file into this area but be careful not to paste it into any of folders there.
the device will recognize the new update file and invite you to install it.Follow the on-screen instructions.
To download the firmware navigate to this link click HERE
To the firmware ..select your product ..and then click on Download Archos 5 Internet Tablet OS v 2.0.38 (92054Kb) .
Save it to your desktop .

1) Contact your service provider to obtain instructions and the SIM unlock code for your device.
2) Download one of the following files:-
a) sim ulock tool serial blackberry.zip
b) sim unlock tool usb blackberry.zip
3) Extract the file and save it to your personal computer.
4) Connect the device to the personal computer.
5) Double-click the downloaded file. If prompted, enter your device password.
The unlock tool runs, and the device resets when complete.
6) Proceed with the SIM unlock instructions from your service provider.

NOTE:-This happen's when you're trying to change the service provider.
If you intend to change your service provider, contact your current provider and inquire whether your BlackBerry device's SIM card is locked. If your BlackBerry device has a locked SIM card, you will need an unlock code. Some carriers charge a fee for this. Once the BlackBerry device is unlocked, it will accept a new SIM card and a new service provider.

I have a Tom Tom go 300 the existing memory card is only 128 MB. so i purchased a new 2GB sd memory card that is compatable with my device. I followed the instructions on Tom Tom Home which tells you to back up your TT take out the memory, install the new memory card and then restore your device, the problem is that it won't restore the information from my computer back onto the new 2GB memory card.

Let's check your Windows 98 Version first :)

• Right click on My Computer and select Properties
• On the System Properties page that opens up click on the General tab, if it is not already on that page.
• Under the System heading, look for the version number (see right)
• Version 4.10.1998 is the original version of Windows 98 (98FE)
• Version 4.10.2222 is Windows 98 Second Edition (98SE)
• Click the link below for the download and installation instructions for your version of Windows 98

Fo Windows 98 FE:

1. Download and install the Windows 98 Service Pack (35.5Mb)
2. Download to your desktop the driver file from the Download section below
3. Remove ALL drivers for USB flash drives in Device Manager (Optional)
   
4. Remove ALL drivers for any USB 2.0 controllers (many have an uninstall option) (Optional)
5. Remove ALL unknown devices from Device Manager
   
6. Run the exe file you downloaded, and follow the instructions, rebooting after installation
7. When the computer boots up again, it may detect new USB 2.0 controllers, in which case you may need to reboot again

The drivers can be downloaded from the following link:
Windows 98 FE Generic USB Mass Storage Device Drivers v3.20


For Windows 98SE:

1. Download the exe file to the desktop
2. Remove ALL drivers for USB flash drives in Device Manager
3. Remove ALL drivers for any USB 2.0 controllers (many have an uninstall option)
4. Remove ALL unknown devices from Device Manager
5. Run the exe file you downloaded, and follow the instructions, rebooting after installation
6. When the computer boots up again, it may detect new USB 2.0 controllers, in which case you may need to reboot again

The drivers can be downloaded from the following link:

Windows 98 SE Generic USB Mass Storage Device Drivers v3.3

For detail explanation, please visit http://www.technical-assistance.co.uk.
It's help for me :)

Thanks
AkulahPathub

With regards to this issue, I would suggest you to download windows update since samsung MTP devices are generic driver loaded by microsoft. Then after you have downloaded the windows update press and hold the play button of your device while you are connecting it to your computer, if this is successful a Found new hardware message will pop up on your screen then just follow the on screen instruction on how to install your device. Hope this helps. PEACE!