Question about Lands Phones

Open Question

My base station is not working at all it does not have the red light on need advice?

Posted by Allan Hurford on

Ad

1 Related Answer

elix0411

Jose Cada

  • 3530 Answers

SOURCE: My wireless home telephone system

Welcome to Fixya

The base station can hold up to 12 handsets. All you need to do is to register the handsets. Please see below procedure on how to register the handset:

1. Placce the unregistered handset to the base. PRESS FIND HS 4 SEC ON BASE should appear. if this will not appear on the handset screen, remove the handset and place it again to the base or charger.

2. On the telephone base, press and hold FIND HANDSET for about 4 secs (until the red IN USE light on the telephone base turns on) abd then release the button. The handset will show PLEASE WAIT...and it takes about 10 secs to complete the registration. The handset shows HANDSET X REGISTERED (X represents the handset number assigned) and you will hear a beep when the registration completes.

Note: if registration fails , the handset shows NOT REGISTERED. To reset the handset, remove the handset from the telephone and place it back in . Try the registration process again. You cannot register a handset if any other system handset is in use.

Thank you for using Fixya!

If you need further help, reach me via phone at https://www.6ya.com/expert/elixirjose_00375ea24bd8141b

Posted on May 30, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is the base station not working when the power supply is good?


It is highly unlikely that you will be able to buy just a new base station from the original manufacturer. If you are still covered by the warranty, return the unit and try to claim a brand new unit.
Try taking a call even though the red light doesn't work. Sometimes, the bulb can be faulty. This however, shouldn't prevent you from making a call

Oct 12, 2014 | RTX DUALphone 3088

1 Answer

The lights on the base station are not working. Yes, I have checked the owners manual.


The power supply of the base station is working correct? the cable from the power supply is not broken? and the cable from the power supply is inserted?
Just a few questions, things I would start with when my base station wold not have any lights.
Oops the base station of my Siemens Gigaset S79H does not have lights.

Jul 22, 2014 | Siemens Gigaset 8825 Cordless Phone

1 Answer

Braun 8995 - YELLOW LIGHT STAYS ON!


I experienced the same symptoms on my 8995; solid yellow light (even though the cartridge was full), cleaning failed (red light on) after pressing either start button. After many failed attempts to clean the razor, unplugging the station and pushing start button, I decided to clean the razor under running water. I rinsed the razor under water and then turned it on allowing it to run in a pool of water (like it would in the station). After water cleaning, I returned the razor to the station, pressed the start button and it worked! Was able to do both the quick clean and auto clean.

Jan 06, 2013 | Braun 8995 Electric Shaver

1 Answer

Registering Handset to Base Station


Registering the handset to the base station has nothing to do with your wireless router. The handset and the base act like walkie talkies. The signal from the handset must match the signal in the base station. The handset may have a reset button of its own, or a sequence you must go through to register the handset to the base. Try removing the battery from the handset and see if that will work. If not you need the manual to tell you what to do to register the hand set to the base.

Dec 12, 2017 | RTX DUALphone 3088 for Skype

1 Answer

How to reboot soundstation 2w polycom if you forgot the password


egistering Base Station on Polycom SoundStation 2W
Hold down 1,4 and 9 until green & red lights flash. Then hold down the page on the base station.
OR
You can register the base station to the console by:
1. press menu key
2. Select Admin Setup
3. Select Registration
4. You will see "Register with Base Station" in display. Press the Register softkey.
5. You will see "Power cycle base station then press ok". Unplug base and plug back in and press OK softkey.
6. You will see "Press and hold the paging button on the base for 10 seconds"
7. You will see Registering in the display on the console and then it should go to ready mode.

Mar 05, 2010 | Polycom SoundStation 2W (2200-07800-001)...

2 Answers

Ear piece does not work. Station top light does not come on


The 500A base station is definitely compatible with the 510 earpiece. If the earpiece is turned off or unpaired the base station's red power light will be flashing. If the earpiece is already off, try turning it on by holding down the little black button on top. The base station will automatically try to find the earpiece and the blue light on top of the base will come on. If the earpiece is already on (slow flashing blue light on the mic boom) turn it off and back on again and wait for the base to find it.

Nov 10, 2008 | Plantronics - Bluetooth Headset Plus Base...

1 Answer

Plantronics voyager 510 headset


Make sure the headpiece is charged. Turn the headpiece off by pressing the little black button on top of the earpiece and holding for about 5 seconds. Turn the earpiece back on again the same way. You should have a slow flashing blue light on the mic boom. The base station will now try to find the earpiece and within about 20 seconds the red light on the base should be steady and blue light on top should be on.
If this doesn't work you may need to manually pair the earpiece to the base by pressing and holding the Listen Volume Adjust + Button and headset Call Control Button on the earpiece until the light on the mic boom flashes red and blue repeatedly. As above, the base station will now try to find the earpiece and within about 20 seconds the red light on the base should be steady and blue light on top should be on.

Nov 05, 2008 | Plantronics - Bluetooth Headset Plus Base...

1 Answer

Audioline cordless phone


answering machine not working on the base station

Jan 13, 2008 | Philips CD6452B/37 Twin Cordless Phone

4 Answers

Base station


You can register the base station to the console by:
1. press menu key
2. Select Admin Setup
3. Select Registration
4. You will see "Register with Base Station" in display. Press the Register softkey.
5. You will see "Power cycle base station then press ok". Unplug base and plug back in and press OK softkey.
6. You will see "Press and hold the paging button on the base for 10 seconds"
7. You will see Registering in the display on the console and then it should go to ready mode.

Oct 12, 2007 | Polycom SoundStation 2W (2200-07800-001)...

4 Answers

TWX977 submersible unable to base register


push menu on base station - select register phone

push # sign on twx977 phone at the same time

phone will register on 9485 base station and unit

Sep 09, 2007 | Uniden TRU9485 Cordless Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Cindy Wells

Level 3 Expert

6241 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

k24674

Level 3 Expert

8092 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...