How do I remove the CD magazine from a kenwood kdc-c462 which is out of car & has no power?

It is an error. Make sure that cd is not deformed by heat.

I have a 10 cd changer and it shows E99 what can I do to eliminate this problem . thank you

There is a manual eject slot on the side of the CD changer. You will need a small flat head screwdriver or a pry tool to insert into the slot.

From the Kenwood manual:
Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. 99 E: Check the disc magazine. And then, press the reset button on the unit. If the "99E" code does not disappear, consult your nearest service center.
I hope the rest works for you.

try pacparts.com. they should be able to get you a price on a magazine.

you need to purchase the correct bus cable

I put a small pin in the reset button a few times and that then got the catridge to eject.

I had the same problem. I opened up the unit and found out that there is a plastic gear that moves the loader. When worn the loader can not load tha magazines nor change cd's. I replaced the gear and the cd autochanger worked fine.

Gerald,

Kenya.

Reset the unit ithe reset button is on the cd changer

Gave up on it and bought a pioneer. Kenwood said to take it in to a service center. The service center would have cost me more than the crappy stereo.