At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I am trying to install cartridge but the jack does not come in the middle of right hand opening. At the same time light next to the power light is also blinking.I am trying to install cartridge but the jack does not come in the middle of right hand opening. At the same time light next to the power light is also blinking.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Epson printer blinking different lights. The different lights blinking has different meaning and solutions. When the Epson printer red light blinking that means ink cartridge of your printer is out of ink. And when your printer green light blinking that means paper gets jammed inside the printer.
You can fix the Epson printer lights blinking error using following steps:
·Fix the paper jammed ·Check empty or damaged ink cartridge ·Clean the dirty print head or replace missing or failed print head
My C60 Epson Stylus printer is not printing. First of all the paper jammed, I pull the paper from the front and since then the catridge holder is not going to the middle to print. also the green light keepon flashing and the red light stays on. I need your help.
keenepadgl, "Contact service engineer" for a C60 used to be all you could do. Now you can go to SSC Service Utility and download it. But the red light blinking (if that is all that is happening) simply means you have a ink cartridge that is low but not empty. If the red light stays on, then it means a ink cartridge is empty. By downloading SSC Service Utility you can solve about any problem you have with a C60. That's what the "Service Engineers" use. Check out the protection counter reset in SSC, that is the main reason people had to send their C60s to have serviced., and what service would do is press the reset button in SSC program. NOTE: I would go to inkmizer and get some cleaning fluid instead of nail varnish remover.
zark4, The green light flashing means you have print jobs waiting to be printed. Don't Turn Off The Printer When The Green Light Is Flashing ! If you have paper in the printer, the red light means you have an empty ink cartridge. Because both things are happening at the same time, here's what you need to do. First click start. Click printers and faxes. Double left click the Epson C-60 Icon. Left click Printer and click Cancel all documents and click yes, then exit. Remove and reinsert your new ink cartridges to make sure they are seated correctly. After you have done this and the printer finishes the automatic charging of the ink cartridges, the lights should be back to normal. Green light on.
with regards to the status of the lights., its either the cartridges that you installed is not recognized by the printer's print head or cartridges are defective. try these steps: if all the inks are new take them out and get an eraser and rub the small chip gently so as to clean the contacts of the chip ( don't touch it with your finger ) reinsert the cartridges in the printer and allow it to charge.
If you´re pressing the ink button and the carriage still does not moves is cause the level of the ink is low, but it does not finished yet. You must use the printer more, then the red light will stop to blink and hold on, then you´ll be able to change the cartridge.
Hi Greenhorn,
Your info is slightly conflicting - I think.
As I remember the C60 has just 2 LED's:
1 - Green for Power
2 - Red for Error
The third button - Cartridge exchange - has no LED
Now it is a while since I looked at a C60 and my brain leaks like a sieve, but that's the way I remember it and feel free to correct me if I'm wrong.
The error codes I remember are:
Printer status - Indicators - Priority
Power - Error
Power ON condition On -
Ink sequence Blink -
Ink Cartridge change mode Blink -
Data processing Blink -
Paper Out *1 - On
Paper jam condition *1 - On
Ink end (Black) *1 - On -> Blink
Ink level low (Black) - Blink-> Blink
Ink end (Color) *1 - On -> Blink2
Ink level low (Color) - Blink-> Blink2
Ink end (Black and Color) - On -> On
No Ink Cartridge (Black or Color) *1 - On
Maintenance request (Ink Overflow Countererror) *1 Alt Blink Alt Blink
Fatal error *1 Off On
Special setting Blink2 Blink2
I am trying to install cartridge but the jack does not come in the middle of right hand opening. At the same time light next to the power light is also blinking.
×