Changing lens on oakley razor blades glasses

You may be able to find it on the internet. Once they stop making the parts you have to fend for yourself.

hope this helps. gabe

Try ebay.

take a razor blade and pry on the silver cap on the back.It will pop right off

You can try this link and follow the instructions that most fit your style of band.

http://www.webwatches.co.uk/how_to.htm

Go to http://uk.oakley.com/dealer and you will be able to enter your address to give you the location of your nearest dealer.

You will need to pop off the back of the watch. A razor blade knife works best as you can slide the thin blade under the cover and work it off. Once off, you will see the battery and be able to match it up at any radio shack store. Joe.

To find a registered repair person in your area.
GOTO:
http://www.watch-clock-makers.org/
Hope this tip helps.
r/ David
http://antiqueclock.clockstop.com/

If you go to their web site (www.oakley.com/) you will see that the illustration a watch similar to yours (it is a Blade II) and shows a metal one.

If you use the store locator to find one that is near you and speak to them about changing the strap.

This may seem simple to do but it is literally a ***** of a task. Best to where amplifying glasses and use a ball point pen, not a pin or pencil. Push one side of the pin in while keeping a slight outward pressure on the band. When it releases be care full not to let it fly off into the void(which they can) and then move to where you need the band to be and reinstall using a single edge razor blade. Just carefully align the opposite side (assuming youve alredy put one end in)place the razor blade on center and slide the remaining pin into the hole area pull the blade out slowly and listen for it to click into place.

I called Oakley customer service and they said mail in watch and they will put on a replacement band for 45 bucks