I had an f1 error so i replaced the control board I also replaced the thermo coupler on the top oven as the top oven was the first problem (befor f1 error began) Now when i try to use top oven i get a f1 error this is after the relay switch makes a clicking sound i hit oven cancel on the upper oven does nothing if i hit oven cancel on the lower oven it cancels the f1 error.
I can use the botom oven with no issues i think looking front to back at oven the control board to th right is for the lower oven but not sure and it seems to be the one that is clicking at time error ocures any help would be great.
thanks in advance for your help
289 views
Usually answered in minutes!
i have the F1 display too! No idea what has happened or how it started. The display just came up and it beeps constantly until I hit "cancel", but then starts up again with the beeping. I don't have the double oven, but it's a Amana Convection Oven.
I RECIEVED AN F1 CODE AND REPLACED BOTH ECR BOARDS AS WELL AS THE CIRCUIT RELAY. I STILL GET THE F1 CODE WHEN THE POWER IS TURNED BACK ON BEFORE TURNING ON THE OVEN. ANY SUGGESTIONS, I AM AT WITS END.OVEN WORKS FINW IF I PUSH CANCEL AND THEN PUSH BAKE. JUST HAVE TO TURN AC POWER OFF WHENEVER NOT USING THE OVEN.
×