I want to program tax on the non tax button , any help , thx

To change the name of the tax on your Sharp XE-A202 cash register, you will need to follow these steps:

1. Press the "Menu" button on the register.
2. Use the arrow keys to navigate to "Program" and press the "Enter" button.
3. Use the arrow keys to navigate to "Tax" and press the "Enter" button.
4. Use the arrow keys to navigate to the tax rate you want to change, and press the "Enter" button.
5. Use the arrow keys to navigate to "Name" and press the "Enter" button.
6. Enter the new name for the tax rate (e.g., "Tax 23%") by using the number keys and then press the "Enter" button.
7. Press the "Menu" button to exit the program mode.

It's worth noting that the process for changing the name of the tax may vary depending on the specific model and firmware version of your Sharp XE-A202 cash register. If you are unsure about how to change the name of the tax or if you need further assistance, I would recommend consulting the user manual or contacting Sharp's customer support for further assistance.

After programming the tax you also have to link the taxable PLUs or department to tax by using the digit one and 0 for the non taxable

Firstly, change the rates for each tax in the tax rate setting tables of your manual. Then you need to turn on tax rate 1 and 2 for departments that need both. This is done in the department programming tables. Tax setting can be quite involved so follow the tables carefully.If you need a programming manual, One of the users has it here:

http://the-checkout-tech.com/manuals/cashregisters/Casio_PCR-T2000_users_and_programming_manual.html

Use 1 on all taxable and 0 on non-taxable buttons

You need to check the tables in the department programming section of the book. There will be a setting for tax or non tax for each tax number. So if you need to turn off tax 1, set tax 1 to non tax. See how you get on.
If you need a manual, C-tech have one here:http://the-checkout-tech.com/manuals/cashregisters/Sharp_XE-A402_operation_manual.html

Hi,

Bingo!! that's right. The steps are :-

KEY PGM
3 SUB-TOTAL
0125 SUB-TOTAL
( New Tax ) CASH
5002 CASH
SUB-TOTAL
KEY REG

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Are you talking about the departments? Do you want a non-taxable department?

Use Tax Turbo

Hi.
That could be tricky. we will need to go through the tax setup in your machine.

My first questions are:

1. Does it happen on all department (item buttons)?
2. Does it happen no matter what payment method you use (cash, check,credit)?
3. When you push Subtotal, does it show the wrong amount then, or only when you press a payment type to open the drawer?

Mark

Hi.
Try turning the key to program mode then,

type new rate (you may have to add decimal places such as 8.00 or 8.000)
Then press your grocery tax button
Then press SUBTOTAL

Turn back to REG mode, and try it.

Let me know if it doesn't work.

Mark