CD player will not play burned Cd's anymore after 5 years of work

Disc is dirty or the pickup lens has dirt on it. Needs to be seen by a Technician to resolve.

The problem with old CD Players are that they sometimes are a little fidgety when it comes to reading CDRs.

You could try burning a new CD on the lowest possible setting, say 2x or 4x.

Also try changing the CDR brand as some cheap CDRs are prone to not reading in old CD Drives.

Try using a regular CD-R (CD recordable - record only once) instead of a CD-RW (CD rewritable - rewrite multiple times). CD-RW use a different "ink" to write the data to the disc and can be re-recorded/erased a couple of times before it loses its ability to write effectively to it.

This model is about ten years old and it can plays discs of CD format only. There is OM for it: http://www.alpine-electronics.ru/podderzhka/archive.html

You ever get a solution to this, mate?

I have the same freaki'n issue with mine all of a sudden. Suspect the power supply's not delivering enough power to rotate the spindle-motor anymore, cause if I take this motor out and connect it to a 1.5V battery, it runs...

let me know if you've found the solution please on: tobie dot steyn at gmail dot com.

Nope. Its getting to the end of its days. I'm guessing by your description you tend to play your music loudly like I do. Well when you do that it causes vibration. Vibration+electronics=Short life span.

HI. the main board is ok. this is the actions of a malfunctioning optical lens assembly. the lens is unable to read, due to the damage to its structure or, the laser has burned out.

The main board is programed to issue the (no disk) alert if the lens doesn't relay audio data. simply replacing the failed optical lens assembly will fix this issue.

No solution - plastic thread driving opening/closing had snapped after 16 years!

Dust may not be the entire cause, but without knowing the make and model, anything I list would be pure speculation. Please post the make and model. That should give me enough info to list the probable problems and their solutions.

Thanks,
Dan

I suggest you should give your audio player for general service..!!

source http://www.kenwood.nl/support/veelgestelde_vragen/ Changer Error Codes ? E-00: Poor Cable connection. ? E-01: Magazine not properly set in changer. ? E-02: No Disc in magazine. ? E-03: CD does not have selected track number. ? E-04: Disc is dirty, upside down or unreadable. ^^^^ ? E-10: No data is recorded on the MD. The player plays the next disc automatically. ? E-99: Changer malfunction, disc may be caught in machine or changer requires service. I suggest the lens needs a clean, or someone has dropped it and broken the delicate lens mech. Luck