Polaroid TV TLU-01911CU - no TV signals via analogue input?

Enter one of the programming code from the list 0004 0005 0009 0138 0130 for your POLAROID TV (including LCD, LED and Plasma) device. enter it using the Number Buttons. The LED flashes once after entering each digit. If the code is accepted, the LED flashes twice after the last digit is and then turns off.

VIZIO Universal Remote Setup codes for POLAROID TV ...

and here is you manual if you need it.

https://www.directutor.com/content/user-manual-polaroid-polaroid-tlu-02241c

Here's a link to get a new remote. http://www.polaroid-tv.com/polaroid-lcd-tv/parts

Polaroid TLU-01941 CU,there are no codes for polaroids,find an original remote on ebay or 1800remotes,or try automatic code search

probably the camera is either analogue or video . How was it connected to the TV via the Aerial Cable or via an AV input
If the camera is Analogue it may be on a ATV channel. So you would need to switch the input Source on the remote for the tv and check the ATV channels. If it was on a AV then try checking the AV input sources.
The free view channels is probably DTV source . .

Tuner issue main board needs new main

Hi
High definition [HDMI] is a format used in tranmitting signals with cable connection. Transmissions are of analogue, and so the set will recogonize it and will chanve to it automatically when you connect the extrnal antenna. There is no way to chage an analogue signal to digital within the Tv itsef. It will display the signal as it is. Definition of analoge signals will be very less than [HDMI]. OK.

Hi, I have had the same problem with DTV. Unfortunately most of the time you need to buy set top DTV antennae to receive even a few channels. I recommend the expensive one that repositions itself for each channel ( DTV will not tune in a weak channel-it may show one from time to time after initial signal is locke in, may be a little scrambled looking for a moment or garbled speech) otherwise your stuck acquiring channels one at a time after repositioning the antenna each time.I'm sorry I didn't have better news but I hope this helps, comment let us know how we did, and good luck,Prodzilla

in UK:
Remotes were found in several locations;

original remote
http://www.remotecontrolscenter.com/polaroid/polaroid-p4084-1.html

compatible remotes
http://www.remotecontrolshop.co.uk/product/Polaroid_TLU-02243W__rc556687.html
tlu-01941c/dp/B001TE6ERE">http://www.amazon.co.uk/Polaroid-Remote-Control-polaroid-tlu-01941c/dp/B001TE6ERE
http://www.remotesrus.co.uk/remote/control/TLU-02243W.htm

You can look at them an see if they match your requirements.

Hi, Try to reset the tuner settings to cable or what ever your are using for a signal. and run the auto search again. Thanks.

The best thing is to replace the signal board, that costs $24.

Check here for the part : Polaroid Replacement TV Parts

You find the part on Ebay here.

Part number is 200-013-JK371-1AH FLM-323B