TCL TV CODE ,ONE FOR ALL REMOTE?
Hello, you can try the search method,
you do this by either holding down the device button eg: TV or if you
have one the "magic" button for three seconds, a light should then
flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)
Many thanks
Mark
(www.sparky-uk.com)
Need codes for one for all
SOURCE: codes for TCL TV on the Chunghop universal remote
HELLO MY DEAR
I NEED YOUR HELP TO MODEL PDP4228AS (TCL TV)
Enter the Service Mode by pressing the remote control keys
THENKS
[email protected]
[email protected]
SOURCE: I need codes for my Dish Network remote to control
Hello, you may have gotten this resolved already, but here are some simple steps to help you out!!!!
Follow the link yo our website and you will be good to go with that remote real soon!!!
http://www.dishnetwork.com/SupportSection/power-scan-instructions
Hope this helps!!
Becki Barned
DISH Network Customer Service
1,032 views
Usually answered in minutes!
my tcl tv is about 7 years old ad it does not want to turn on at the main power swith or remote control does not activate the unit what can cause this
×