My canon MX330 will not print only copy. - Canon Office Equipment & Supplies

You cannot print double sided docs automatically with this model printer because it does not have a duplex unit.
Check out the specs from this WEB site.
http://reviews.cnet.com/multifunction-devices/canon-pixma-mx330/4507-3181_7-33529115.html

I have a canon mx330 fax print and scan all in one printer
To scan without ink just hold the back button in after the ink message comes up it should eventually take you to the main menu then you can hit the scan button.

Hi as you have cleaned the heads the next step is to replace the print heads or some people claim that cleaning the heads with some expensive liquid works I have not had any luck with this.
so I would suggest you look up Canon PIXMA MX330 print head, on Amazon at about £47. so not cheep but very simple to fit
good luck
Ian

Welcome to FixYa!

No, the Canon MX330 is not WIFI compatible.
It has a feature of Bluetooth, PictBridge and Flashdrive Direct Printing though.

Thanks for using FixYa.
Jas247

Multifunction devices usually require two separate inks to acquire functionalities. For example, an empty ink cartridge especially the color ink may still produce copies without multi ink features. However, any attempts to dismaunt the ink cartridges would require restorations from the computer settings. First, inspect the printer for empty accessories that require replacements. After acquiring and replacing ink cartridges makes way for the next processes. Second, connecting the printer that has been restablished would produce display results requesting printer copy allignments. Attempt to print a document to produce the results for alligments. Goodluck

try selecting higher print quality setting. If it still prints faded on "standard" or "high" quality, try running the "printhead clean" or "deep clean" utility (under "maintenance" in printer properties).
If still no good, refill or replace cartridge(s).

good luck with it

LC1000
www.inkbank.com.au

When you double click the Printer and Faxes icon in the Control Panel you will see the printer that your computer is currently using. See.... if the printer image is clear it is online and ready to use, if its blurred then its in offline mode and cannot be use.

To correct offline printer.. some possible reasons is on the usb cable.. check if there is no open wire along the cable...Inserting the USB connector on the other usb slot of the cpu sometimes work just wait first until it is read.

If the printer is still blurred and offline after checking the usb connection, the 2nd thing to do is check the properties of the printer if it is set to offline mode. how? Double click your printer icon. It will display the print jobs window. Click on the Printer tab and uncheck on the "Use printer Offline". Cancel all pending print jobs, close the printer window and try again to print.

clean the head of your printers cartriage from both side

then try

ok bye

Check that the printer shown in the print window is the MX330. It sounds like your default printer is set to be a virtual printer such as Microsoft XPS or Acrobat PDF. You need to set the MX330 as your default printer by going to your Printers and Faxes window, right-click on the MX330 printer and select "set as default" on the list there.

It sounds like the MX330 Fax driver is set up as the default printer in Word 2007. Before using the label option, which doesn't allow you to select a printer, check and see which driver is selected when you just go to print from Word 2007. If it shows MX330 Fax, change it to MX330 Printer.