No remote I am needing to get my tv into the video mode but have lost the remote during a move. Is there any way that I can get to the video mode manually? Annette

Use the channel change button go under channel three you might see Av and others

We are looking for the same remote thatch lost. Any ideas

go to a real specialists on how to fix your problem with your television

You are going to need an original Mitsubishi remote--I do not think in the main menu there is a way to do this without the remote: PART NUMBER FOR THIS REMOTE IS: 290P111010


Almost any Mitsubishi remote that has the FORMAT button on it will work.

If this has helped you rate this solution as I do this here for free.

SD TECH

http://www.comcast.com/MediaLibrary/1/2/CM/VanityURL/documents/us_electronics_uf4200c_manual.pdf here is the link to the 200B remote manual and the codes are on page 3

During a recent move the remote was lost. I have the 6420FF in my son's room and trying to set up dvd and wi console set up, but cannot adjust tv via menu button on tv. Is there any way to set-up game system and/or dvd without remote?

Press the Video or AV button on the TV itself. Otherwise, may need to scroll down past Channels 0, to get Video or L1.

I assume you mean it is set to one of the composite video inputs, such as would receive video from a VCR or DVD player- from their video outputs.

Often, the channel up/down will move it to a channel. I suppose some sets are not this way however, and may even require the remote box. Functions are usually limited with only the buttons on the set itself (like most VCRs of the last 15 years or so). Advanced functions may not be available. Some of the better universal remotes might access these, otherwise the manufacturer remote is the way to fix the problem. Check http://mrremotecontrols.com, for a possible remote box.

hi there, i'm sorry but you need a remote for that problem, ty

the answer to your ques is. go buy a universal remote control. since your tv is made by thomson electric. (ge@rca)you can prob get a rca universal remote at wallmart or walgreens. you won't need to reprogram. it everytime you change baterys. after you get set to turn on and off just hit tv/vcr button on remote or select channel 91 or 92 (on some models that is your video for rca/ge) good luck doctordave