Have a sony videoscope xbr model # kp-61xbr48, the middle bulb in back keeps flahing (the green one) and makes entire picture in front pulsate and not look right, what do i do?

the model listed is a very old set---parts may not be available----language can be selected in the menu but the pink may be a adjustment of the screens (controls) or a circuit problem.

its broked :[

We moved it in one piece.

Remove rear lower metallic cover. Most likely one of the CRT (Cathode Ray Tube)s are leaking coolant down onto circuit that involves video operation causing a low voltage electrical short. You can clean the coolant off and rectify the short and probably earn your video returning, however the one leaking CRT will eventually over heat and require replacement.

Please post both the exact model number (on the back) and the blink count. The standby light should be blinking a repeated pattern. That info will indicate the problem circuit and allow us to provide you with the proper parts/steps to resolve this.

Thanks,
Dan

Torned off the PIP option on the TVs own remote (cannot be done from the cable remote).

just need to balance the three colors red,green and blue that may help remove the front covers and look for black module that have sccree and focus controls just move a little bet left or right be carefull because you can loos the picture e-mail me for more info

I pressed "Demo" on the front of my TV and it worked, I have an old Sony KP-53XBR35 VIDEOSCOPE XBR - no original remote and the Universal remote has PIP button but would not shut it off.
Finally it's off!!!!