Can't figure out how to scan my picture from the scanner directly to my computer

1. Turn on your computer, wait for it to boot up, then turn on your printer.
2. Double click on the " HP Photo Imaging Director " icon on your desktop, it was placed there
when the printer was installed on your computer. A screen will appear which will show the
scanning options of your printer. Do not make a selection at this time.
3. Place your picture on the glass top scanning surface and lower the lid.
4. Click on " Scan Picture " from the director screen.The scanner will make one pass and allow
you to look at the result, it will then make another pass, completing your scanning operation.
5. Your picture can be viewed on HP Photo Gallery and " My Pictures " folder.
Have a Nice Day.

Hi,
just scan it using the command from the computer ..after that you will find the job into the manager folder..of the scanner..from there you can send it directly ..or edit a little ..and copy into computer and attach to the email..or ..use the feature from the scanner's program to send it ..
make sure you set to scan picture cause scanners have a wizard that you can set to scan image (picture Jpeg ....) or PDF ..document ..

just scan it using the command from the computer ..after that you will find the job into the manager folder..of the scanner..from there you can send it directly ..or edit a little ..and copy into computer and attach to the email..or ..use the feature from the scanner's program to send it ..
make sure you set to scan picture cause scanners have a wizard that you can set to scan image (picture Jpeg ....) or PDF ..document ..

If you are using a computer with a Windows Operating System (XP, Vista, etc., ) I can help. Just follow these directions: (From beginning to end)

1) Make sure that the power to your scanner is On but do not plug your scanner into your computer until instructed to do so by the software.

2) Place the CD that came with your scanner into the CD drive of your computer. Install the software for your scanner and plug your scanner into your computer.

3) Re-boot your computer.

4) After re-boot, place a document you want to scan under the lid of your scanner.

5) Go to:
Start > All Programs > Accessories > Paint (and click on the Paint program.)

6) When Paint opens, go to the upper toolbar in the program and click on, 'File' then scroll down and click on, 'From Scanner or Camera.'
(a window will open)

7) Click on the icon for your scanner and then click, 'OK".
(a window will open)

8) Choose the type of document you wish to scan and click, 'Scan".

9) Note: Some scanners take a moment to 'warm up' before scanning. If your scan doesn't begin immediately, just be patient.)

10) Your document will be scanned and automatically imported into the Paint program.

11) When you can see the scanned document in Paint, (again) go to the upper toolbar and select, 'File' > scroll down and select, 'Save As' > (your Pictures Folder will open) > type in a name for your document > and click, 'Save'.

12) You can now exit the Paint program and go to your Pictures folder. There, click on your scanned document to view it.

If you found this information helpful, please give me a big thumbs-up when you rate my answer. Thanks!!

1. Connect a compatible scanner to your computer. A list of compatible scanners is available in technical document 107203 "Mac OS X 10.2: Scanners Compatible With Image Capture "

2. Install any necessary software drivers that came with the scanner.

Note: Not all scanners require the installation of additional software drivers.

3. Turn on the scanner.

4. Press the scan button on the scanner. See the documentation that came with the scanner for specific instructions. Image Capture opens automatically and a preview scan appears.

5. Select the area of the image you want to scan.




Figure 1 Preview image with area to be scanned selected

6. Click Options in the toolbar to adjust settings specific to your scanner.




Figure 2 Options icon

7. Adjust any settings in the drawer that appears.

8. Click Scan.

The scanned image is saved in your Pictures folder in your home directory and opened in Preview.

Note: These are the default options. They can be changed in the Image Capture toolbar.

After your scanner is hooked up just open the scanner utillity and it should give you the option. If you cant figure it out Email me and ill walk you through it. [email protected]

If you are using XP, click on start, then go into control panel, then to scanners and cameras.
From there select your scanner and follow the directions for scanning.

With vista, click on the start button, then type in scan. There should be an option to "scan a document or picture"

Scan directly through your scanner:
Control Panel / Scanners and Cameras
Right Click Your Scanner: Click Get Pictures using Scanner Wizard

First do your scan on Dell 964 scanner &printer. Scan to clipborad. You hear it scan but nothing happens on your computer. Go to control panel - scanners and cameras - scan profiles - find the document you have scanned, select it and click edit - click preview - in the left corner you will see in blue "How to scan a picture" click that, it will lead you to Windows Photo Gallery - there click on file and import from scanner of camera - it will scan there and your scanned pics will be in your picture folder :) Took me a while to figure it out :)
You can avoid all this and go directly to Windows Photo Gallery :)

Fiend your solution direct from hp. Here is your solution...


http://www.hp.com/printer/prob676ijt65/solution
802