Question about Kitchen Ranges
I believe the selector knob on a Whirpool just has to be turned counter-clockwise with the selector pushed in. It will spin off the shaft and then the outer indicator dial will pull off. The shaft also has a keyed slot that will only allow the dial to be removed and installed one way, so there should be no question as to how it goes back on.
Was there a reason as to why you are removing the washer selector knob? If this is a simple matter of replacing a broken water temperature selector, you shouldn't have to remove any of the control knobs to gain access to the selector. The entire front panel comes off by removing the screws holding it in place. That way you can access the broken selector from behind the front panel much easier. Just remove the panel right above the washer top (under the dryer) and it should expose the front panel mounting screws. Remove these screws and the front panel comes off. Just make sure the unit is unplugged before you begin. I hope this helps you. Let me know if you need further assistance.
Posted on Apr 22, 2008
The model number can usually be found just inside the door or drawer (on the range itself).
All the Jenn-Air convection ovens I'm familiar with are electric even if the cook top is gas.
Posted on Jan 31, 2009
SOURCE: Logitech z-5500 control pod
Posted on Feb 26, 2009
Tips for a great answer:
Sep 28, 2016 | Carver Audio Players & Recorders
Feb 04, 2016 | Kitchen Ranges
Mar 31, 2015 | Audio Players & Recorders
Mar 03, 2013 | Ovens
Oct 18, 2010 | M-Audio Oxygen 49 USB Midi Controller
Apr 11, 2010 | Heating & Cooling
Jul 23, 2008 | Heating & Cooling
Jul 06, 2008 | 2001 Pontiac Aztek
126 people viewed this question
Usually answered in minutes!