I have a Panasonic 32' crt tv

Check the power supply; look for bad caps with leaking/bulging tops, check to see if you have standby +5vdc at the power supply connector, the front red indicator will not be on if you do not have this +5vdc standby voltage due to shorted out Q7 and ZD4.
http://s807.photobucket.com/albums/yy352/budm/Protron%20PLTV%203250/

Power supply: http://www.google.com/products?rlz=1T4GGIH_enUS282US283&q=pltv+3250+power+supply&um=1&ie=UTF-8&ei=9lIDTL7XO4fcM7HA-Ds&sa=X&oi=product_result_group&ct=title&resnum=1&ved=0CCgQrQQwAA

model number of your emote should be under the battery lid. Search google for

universal remote codes your_model_remote

Remote should come with a sheet containing the codes. If yours is not on there, contact the 800 number for the remote manufacturer.

HTH

Hi cyoung
To answer your question;
The official release date is june 1/2009.
And sometimes at the back of the tv you might find the actual month that the set was manufactured.

I have a user guide which consists of 21 pages. FYI, you can contact Panasonic Consumer Electronics Company, Division of Matsushita, Electric Corporation of America --- One Panasonic Way, Secaucus, New Jersey 07094 or email - www.panasonic.com

I would suggest to locate a part that looks like the one on this link and re solder all the pins, also check for any high power resistor nearby the IC295890 and put some fresh solder.
Let me know if you need further assistance.

You TV missing Green color ratio to produce correct colors in picture. It might needs service and adjustments in Video section .

Try looking on the manufacturers site or search on google for models that are compatible. Personally, I doubt it, but I could be worng.

Your two options are to take it to a service shop, or the more likely and probably more cost effective option is to purchase a new Television. The newer model will have a far superior picture quality, cost less per inch of viewable area, and likely have more features than your prior T.V. as well.

good luck

Bad capacitors in the standby power supply most likely.