At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have a chocolate that works fine except the bottom left buttom on the half that slides up doesn't work. Everything else works fine on the phone but that. I read a different post that said it might be a battery issue but on that post the phone also had display problems. Also there is no warrenty on this phone. Any help would be great. Thank you.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most camera's, and the Olympus to work the same with auto focus. You place the AF target o the place you want to focus on. (the part that should be in focus in your picture) then press the shutter release button half and wait tip the AF conformation mark lighter up on the view finder. (the little round in on the bottom left) Then frame the picture as you want it shot and press the button complete.
I'm not sure your lens has a AF / MF switch, but that should be on AF all the time.
When you use non AF lenses, your cmarea can't focus automatically.
It should work fine with the kit lens. (lens that was originally delivered with the body)
check the light bulbs (filiments can break and touch the other filament in the bulb and backfeed other circuits) if they appear ok remove the non working bulbs and swap positions with the working bulbs and see if anything changes
Doing a soft reset on the nuvi will usually get the nuvi up and running. If there is a reset button on the
bottom, press and hold it until the nuvi powers back on. If it does not
have the reset button on the bottom, slide and hold the power switch to
the left for at least 10 seconds. Also running the Garmin WebUpdater and reloading the latest update will resolve most issues. Download and Install WebUpdater.
If your unit has frozen, slide the power button all the way to the
right. This is the reset position. Leave the unit in the Reset position
for 5 seconds before turning the unit on by sliding the power button all
the way to the left.
I have a LG Chocolate BL 40. It fell down and cracked its display screen from several loactions. So I got a the cracked display screen replaced with a new one. All seems to be working fine except that when the call comes the answer button which used to display as green gets greyed out and does not lets you answer the call. I have tried upgrading the software as well as a factory reset bit it has not helped. C
Can somebody advise how/if it can be fixed?
there may be a defrost window/ liftgate fuse under dash or in the engine compartment check that first/ you can also check the plug in for the defroster it just pull out and clean with steel wool/ after that if that does not work then the actuall switch is bad switch the button that is/ if you have questions let me know Please rate my response thank you very much
×