Question about Refrigerators

Ad

AP5 doesn't appear to be a GE Model number. The Google search query for this information is

make model specs

and you will get information like this

https://products.geappliances.com/appliance/gea-specs/GTS18SBSSS

Product Dimensions

https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&ei=EfwtXfiMEdHOtQaclLc4&q=GEA+AP5+refrigerator+specs

Or you could ask the tenant to measure the existing one, or it is a good excuse to visit the property and inspect.

Posted on Jul 16, 2019

Ad

SOURCE: SAMSUNG REFRIGERATORS

try here my friend http://www.samsung.com/uk/consumer/type/type.do?group=homeappliances&type=refrigerator

Posted on Feb 19, 2008

Ad

SOURCE: find common dimensions of refrigerators, height, width, depth

There's a zillion makes and models of refrigerators with new one's coming on the maket all the time.

There is no standard fridge manufacturers must follow.

When I find a bad machine, and the customer want's to replace with new, I advise them to take the width and height of their opening before shopping, or be willing to remodel.

Best advice I can give you is plan the refrigerator opening for the worse case scenario on all your rentals.

As a general rule, refrigerators are becoming larger, and probably will continue that trend.

Posted on Oct 24, 2009

SOURCE: What is the cubic feet

The capacity depends on the exact model number. The TBX18TABWW and similar models are 17.6 cu. ft. The refrigerator holds 13.6 cu. ft. and the freezer 4 cu. ft. This model is 64.25" tall, including the hinge, 28" wide, and 31.25" deep.

The GE S series, including TBX18SIBRWW, are 18.2 cubic feet; the specs are 13.04 cu. ft. for the fridge and 5.13 for the freezer. Total height (including the hinge is) 64.75", 29.375" wide and 31.5" deep including the handle. (It takes up 58" with the door open.)

The J series has the same total capacity and dimensions as the S series.

Remember to leave 0.75" free on both sides and 1" at the back and top for air to circulate around the refrigerator.

You can find your exact models specs and manuals here: http://www.geappliances.com/service_and_support/literature/ . Enter the model number in the search box and click submit. Dimensions are provided in the Quick Specs for most refrigerators. The model number will be on a plaque in any of the following spots:

1) On the ceiling of the freezer near the front

2) By the temperature control

3) On the inside wall of the refrigerator near the crisper drawer on either side

4) Behind the crisper drawer

5) On the bottom front of the refrigerator

I hope this helps.

Cindy Wells

Posted on Mar 19, 2011

SOURCE: I need the dimensions of

Hello, click this link for the height, width, and depth http://products.geappliances.com/MarketingObjectRetrieval/Dispatcher?RequestType=PDF&Name=982470017.PDF

click this link as well for any further information on the unit that you may require http://products.geappliances.com/ApplProducts/Dispatcher?REQUEST=SpecPage&Sku=TBX18AABWW

if you have any further questions message me back and please also remember when our chat has fully concluded to rank how this opinion has helped in your appliance situation it allows me to continue helping others in similar situations in the future Thanks

Rick

Posted on Sep 17, 2011

SOURCE: inches to cubic feet 11 X 22 X 15 height X Width X Depth

ft³ =in³ * 0.00057870

3630 in³ = 2.1007 ft³

Posted on Mar 09, 2015

thats 6 meters square need another factor[HEIGHT ] for cube 12x .5x ?=CUBIC

Jul 17, 2016 | Garden

If you measure the height, width and depth you can calculate the volume. You multiple the height by depth by width. Make sure you use the same units for each measurement. For example if you want the volume in cubic feet, make sure all measurements are in feet. If the height is 5 feet 8 inches, you need to convert this to feet, which would be 5.67 feet, likewise for the other two measurements. It wont be exact because there will be bits sticking out but will be near enough. Make sure you also calculate the volume of the door space as that is included in the volume.

May 21, 2016 | Refrigerators

1
Open the refrigerator door. Measure the depth of the refrigerator

from the front edge of the refrigerator opening to the back wall. Make sure that you measure in feet and not in inches. Note the depth measurement on a piece of paper.

2 Measure the height and the width of your refrigerator's opening. Note the two additional measurements on your paper. Multiply the depth, height and width measurements to obtain the refrigerator's cubic foot measurement.

3 Take the same measurements from the interior of the freezer. Multiply those measurements together to get the cubic foot size of your freezer.

4 Add the cubic foot measurement of the refrigerator interior to the cubic foot measurement of the freezer interior. This gives you the total cubic foot measurement for the refrigerator.

Things You Will Need

from the front edge of the refrigerator opening to the back wall. Make sure that you measure in feet and not in inches. Note the depth measurement on a piece of paper.

2 Measure the height and the width of your refrigerator's opening. Note the two additional measurements on your paper. Multiply the depth, height and width measurements to obtain the refrigerator's cubic foot measurement.

3 Take the same measurements from the interior of the freezer. Multiply those measurements together to get the cubic foot size of your freezer.

4 Add the cubic foot measurement of the refrigerator interior to the cubic foot measurement of the freezer interior. This gives you the total cubic foot measurement for the refrigerator.

Things You Will Need

- Tape measure
- Note paper

May 19, 2016 | Kenmore Refrigerators

Ray and impossible question to answer

If you do not know the make of the fridge then how can you reasonably expect an answer so you will get the generic answer

open the door and measure the width, height and depth and multiply all the dimensions to get the cubic feet

If you do not know the make of the fridge then how can you reasonably expect an answer so you will get the generic answer

open the door and measure the width, height and depth and multiply all the dimensions to get the cubic feet

Mar 02, 2016 | Refrigerators

measure the internal dimensions ( width X height X depth and that will be the cubic feet capacity of the unit

while you answer may not be exact to what the manufacturers state , it will indicate the advertised size of the unit

while you answer may not be exact to what the manufacturers state , it will indicate the advertised size of the unit

Nov 11, 2015 | Kenmore Refrigerators

Normally refrigerators have stickers inside that state the cubic feet. If that's missing you must measure the width X depth X height to get cubic feet. WxDxH= cubic feet.

Jan 10, 2015 | Refrigerators

That depends on how high and how deep the refrigerator is.

For example, if the height and depth are both 27 inches then the volume is about 11.39 cubic feet. If the height is 36 inches and the depth is 27 inches then the volume is about 15.19 cubic feet.

For example, if the height and depth are both 27 inches then the volume is about 11.39 cubic feet. If the height is 36 inches and the depth is 27 inches then the volume is about 15.19 cubic feet.

May 25, 2014 | Refrigerators

I have this exact model. Here are the specs:

depth: 30"

height: 68.5". with hinge: 69.5"

width: 35.5"

15.5 cubic feet in the refrigerator section

10.0 cubic feet in the freezer section

25.5 cu ft total

depth: 30"

height: 68.5". with hinge: 69.5"

width: 35.5"

15.5 cubic feet in the refrigerator section

10.0 cubic feet in the freezer section

25.5 cu ft total

Sep 08, 2011 | Kenmore Refrigerators

Length times Width times Height

In your case a refrigerator, assuming you want to find how many cubic feet the inside (storage) has, inside depth times inside width times inside height. This in case you want to find the interior cubic feet. Hope this helps...........

In your case a refrigerator, assuming you want to find how many cubic feet the inside (storage) has, inside depth times inside width times inside height. This in case you want to find the interior cubic feet. Hope this helps...........

Nov 23, 2010 | Refrigerators

There's a zillion makes and models of refrigerators with new one's coming on the maket all the time.

There is no standard fridge manufacturers must follow.

When I find a bad machine, and the customer want's to replace with new, I advise them to take the width and height of their opening before shopping, or be willing to remodel.

Best advice I can give you is plan the refrigerator opening for the worse case scenario on all your rentals.

As a general rule, refrigerators are becoming larger, and probably will continue that trend.

There is no standard fridge manufacturers must follow.

When I find a bad machine, and the customer want's to replace with new, I advise them to take the width and height of their opening before shopping, or be willing to remodel.

Best advice I can give you is plan the refrigerator opening for the worse case scenario on all your rentals.

As a general rule, refrigerators are becoming larger, and probably will continue that trend.

Oct 23, 2009 | Refrigerators

61 people viewed this question

Usually answered in minutes!

×