Hoover washing machine door handle

the wider end fits onto the tub.If you put a long thin screwdriver through the door interlock hole to hold the retaining spring (the stretchy wire type) you will find it will go on easier.

Firstly,make sure machine is turned off at the wall.the easiest way is,by carefully putting a small flat blade screwdriver under the plastic ring that holds the door seal to the case of the machine, gently pry the ring off the machine. Now peel the door gasket away from the shell and fold it inwards into the drum.
You may need a torch now. Pushing the gasket back look into the left, front of the machine and on the front of the tub you'll see the fill hose that comes from the soap dispenser. Check that the hose has not come loose, or possibly rubbed a hole in it off the tub. You can re-seal it by just applying standard silicone/mastic.Re-fit in reverse, but firstly open the door gasket clip completely to making fitting possible. Once you've fitted it just give it a good squeeze.

go to www.fitness.manualsonline.com

God bless you

Please check this link for tips ;
http://www.espares.co.uk/advice/washing-machines/a/7/1278/how-to-fit-a-washing-machine-door-handle.html

http://www.espares.co.uk/advice/washing-machines/a/7/1394/how-to-replace-the-door-seal-on-a-washing-mac.html
not the same machine as yours but should give you good idea of how to do the job

Not familiar with Hoover. I only work on American machines.
Look for youtube videos which show how to fit a door catch.

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Hi.
You need ro remove the door seal from the front of the washer, this will then give you access to the door lock.
Good luck

how to fit a new door seal to a hoover hnf 3157 washing machine

Does an Hoover elite 920 gearbox fit the hoover elite 1205 thanks