I get an E140 error message when I turn on the copier

Power the machine off by holding down the power button. Wait a few seconds and then power the machine back on. - If no error message appears on your machine's

Hello cockie ,

You can diagnose most problems by checking the control panel LED's for ink out, paper-out or copier problem.
If a problem occurs while you're printing, you'll see an error message in the progress window on your computer.
It may also be helpful to try running a printer nozzle check.

See the following message problems and solutions:

Error Message Probable Cause No color or black ink cartridge - - >
Press the Color Copy button to install a new ink cartridge. The indicated cartridge is not installed or it is installed incorrectly. Color or black ink out - - >
Press the Color Copy button to begin replacing the ink cartridge. The indicated cartridge is out of ink Ink cartridge error - - >
Press the Color Copy button to begin replacing the ink cartridge. There is something wrong with the ink cartridge. Paper jam or misfeed - - >
Press the Color Copy button and clear the paper jam by hand if necessary. Paper is jammed. Press the Color Copy button to clear the jam.
See the User's Guide for more troubleshooting tips. Paper out - - >
Load paper in the sheet feeder and press the Color Copy button. Paper is out. Load paper in the sheet feeder, then press the Color Copy button to continue printing. Scanner unit open - - >
Close the scanner unit. Scanner cover open. Carefully lower the scanner cover and press it down until it clicks securely into place. Scanner error - - >
See your documentation and call Service if necessary. Press the On button to turn off the EPSON CX3200. Check the transportation lock and unlock it, if necessary. Turn on your EPSON CX3200 again. If the error message still appears, contact your dealer or EPSON. Printer error - - >
See your documentation and call Service if necessary. Press the On button to turn off the EPSON CX3200, then press it again to turn it back on. If the message still appears, contact your dealer or EPSON.

copy on my machine then i tray to copy

The fuser film is not rotating properly.Replace it .

If it copies ok, then the issue is either the way it is cabled to computer or the print driver software settings on pc.... How is it connected via USB? Check port and correct driver is in windows/control panel/printers. Reinstall.

An internal error has occurred. Turn the printer off and on. If the problem is still there the laser needs to be replaced. If the machine is less than a year old then the machine will be fixed under warranty.

Does the machine copy okay? If you copy several pages, do they all come out normally, or do you get an error message like when you print?

What is the error message that shows up? If the machine prints a few pages before the error comes up, and it works fine when you are copying, the problem is likely either with your network or with the application you are trying to print from. Depending on what the error message says, it will help to isolate the problem.

It could also be the print driver itself. You can go to Ricoh-USA.com to the Downloads section and either update or reinstall the print driver if nothing else works.

check the exsposure lamp this error relates to damaged or blown lamp also you check this when you turn th ecopier on you should see it self test at hte start up if there is no light it has blown or connections are bad

Hi,

Please Click Here and follow the instructions to reset your All-in-One.

Open right side door and check for a jam in the fusing unit (the one that is normally hot). Remove jam carefully. Hit P * C * and enter 14. Push the start button like you are making a copy. Machine should reboot and code should not return. if it does, you may have a dirty themistor, or blown lamp.