I thinking of bying this Sub, but I have an old Yamaha RX-V660 receiver. Can I conect the Sub to that receiver and how?

How do I reset my Yamaha RX-V730 A/V Receiver? ' Yahoo Answers

https://answers.yahoo.com/question/index?qid...

May 31, 2013 - I'm stumped on how to reset this receiver. I have no remote and just purchased a Powered sub woofer and it doesn't work that loud through the ...

RX-A730 - Yamaha Downloads United States

download.yamaha.com > Support > Downloads

13 items - ... About Yamaha. My Account ... Downloads for RX-A730. Find Your Model .... RX-A730 Owner's Manual, 14.07 MB, 4/17/2013. French, Manual, pdf ...

How do I reset my RX-V1800 parameters to the factory ...

faq.yamaha.com > Support > FAQs > Search Result: RX-V

Nov 13, 2010 - YAMAHA ... Power the RX-V1800 back on using the [Master On/Off] button and the receiver is now set back to the original factory settings.

Resetting/Initializing the receiver to factory settings - RX ...

Yes, this receiver is a good one. Alot of gear from a few years ago will still outperform new gear. And why change something if it can be repaired. It most probably has a blown backlamp to the lcd display...some models so easy to change that they just plug in!!. This is quite common and easily fixed. Heat kills electronics. If you wish to keep the old girl going i suggest trying to increase the ventilation. even by getting it into the coolest place in the cabinet. The top of the rack of gear is always best for your amp to get rid of the heat. and try to put some extra height(with say a 2 sticks of wood) under the feet both under the amp and any bits of gear that may sit on top while taking care to to block the ventilation holes. if the amp uses a rotary function selector switch it may have dirty contacts that are causing your crackling problems. A spray internally to the switches contacts with CRC 2-26 will sort that.

No manual for your receiver? Find it here and read it.

http://www.retrevo.com/support/Yamaha-RX-V365-Receivers-manual/id/23270ag802/t/2/

You have to tell it there is a sub then, tests the sub then make some bass management choices.

I'm making an assumption: that you're using a powered subwoofer as required by this receiver.

Since the RX-V463's amplifiers don't drive the sub directly, and it supplies the sub's amp with only a Line Level signal, the impedance of the sub is irrelevant.

http://www.retrevo.com/support/Yamaha-RX-V463-Receivers-manual/id/13748dj482/t/2/

It sounds like you have switched off the sub channel.
Keeping pressing C Level on the remote till you see SWFR.
Press D l / h to adjust the speaker output
level.

Does the sub work at all? How is it hooked up? The sub needs to be fed by an RCA cable from the Subwoofer Output jack for the receiver to control its output.

if you not tech ..suggest send to service
this problem is display negative voltage missing......or display driver ic bad.....

Try checking the connections.
If your really value your receiver it would worth it.

Some systems don't send signal to subwoofer if speakers in SPEAKERS SETUP are set to LARGE, they redirect signal to center and front speakers. Maybe that's problem.