Question about Kenmore Washing Machines
SOURCE: washer does not fill
Firstly, check to see that your water temperature is selected properly. Next, check to confirm water supply to the washer is adequate, both HOT and COLD. If confirmed, try replacing the fill valve.
Posted on May 27, 2008
I've had the same problem...you can purchase a replacement lid switch at your local appliance parts store for about $35. Fortunatly, the sales person at the appliance store had diagrams and provided instructions to replace the switch. I was able to finish the job and fix the switch in less than 1 hour. Good Luck.
Posted on Jan 05, 2009
Posted on Mar 27, 2009
It came off of the Clyde, OH production line the 26'th week of 2001.
Amazing, ain't it? Seriously... the info is embedded in the serial number. Here's the link to the code sheet.
Please remember to rate this solution as "FixYa", OK?
Posted on May 02, 2009
Tips for a great answer:
Oct 09, 2018 | The Computers & Internet
Sep 11, 2014 | Kenmore 387780 series 80 Washer Motor
Aug 26, 2014 | Kenmore Washing Machines
Jan 29, 2018 | Kenmore Washing Machines
Jan 20, 2013 | Washing Machines
Jun 06, 2011 | Washing Machines
Jan 07, 2011 | Kenmore 24032\24036 Top Load Washer
Mar 08, 2010 | Kenmore 3.2 cu. ft. Plus Top Load Washer
192 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: