Canon i9950 inkjet printer, keeps showing paper jam even though nothing there. If I turn it off and on, it prints anything from 1 to 4 pages before error message paper jam again. Just going round in circles.

Reset Procedures for Canon i550, i560, i850, i860, i865, i9100, i9950 Printers

1. Turn off Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your Canon i550, i560, i850, i860, i865, i9100, i9950 Printers should respond as normal.

you done.

hi
E3 is a paper jam error, look inside the printer where you load the paper is there any paper jammed ? remove it carefully.

paper-jam alarm shows even though there is't one

try turning off the printer for about 10 sec. to clear its memory and turn it back on.. then print again

Hello you can try this may do it

1. Turn off Canon i550, i560, i850, i860, i865, i9100, i9950 Printers
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your Canon i550, i560, i850, i860, i865, i9100, i9950 Printers should respond as normal.

Please all I ask is call back and just gave a vote, it will gave me some satisfaction to know am helping some one, so I will keep on helping.
All The Best: Pineworks

message keeps showing print cartridge cradle cannot move, I have check everything, no paper jams nothing under printer, I am turned off printed but keep getting same message.

u have to reset ur printer try to hold ur finger on power button for more than 15 sec then turn it on again

From the Printers & Faxes window, check in the i9950 Printing Preferences, Page Setup tab, for the following settings:

Page Size and Printer Paper Size are both set for the same size (both A4 or both A3).
Printing Type is set for Normal-size Printing

The graphic on the left should now show A4 (or A3) and Normal-size Printing in the legend.

Once that is set, verify from the application you're printing from that these settings are not being changed by the application (Preferences button in the print dialog box).

Requires new rollers