I have a Hoover vision hd b energy condensor dryer mega 9kg. The start light and empty water light flash at the same time and dryer stops. I have emptied the water container and the filter and still the dryer wont come back on after i have left it for a while and then tried again.

Go to espare.com and watch the vidios about that

there,s a sensor wich is broken or dirty or collapsed
usually found down front inside the cabinet

held in via 13mm nut

photo graph it with ure phone then put it back togather in reverse order

unplug it now and see if that helps

the motor could be weak or the little pulley the belt goes around could be bad

Most likely, remove water collector, look under machine there is a part that meets water collector that needs to be removed and cleaned

my hover washer dryer 1200 spin will not spin water comes into the drum and will not spin

Dear Carol. I'm writting to you because I encounter the same problem with the same washmachine (Hoover Vision HD 9kg): fill/empty ok but the drum won't turn = error 09!
My guarantee is out of date only from 3 months and Hoover Switzerland won't help me (I have to pay for the reparation more than the machine price!!!)
I've read on another web forum that the problem could be due to an electrical component (BTB12-600BW), but before to try to change it by myself, could you please tell me how did you resolve your problem???
Please, answer me at "[email protected]"
Thank you
Johan

Had same problem wouldnt spin found clip on motor had come loose pushed it back on problem solved!