Question about Maytag Ensignia 3.3 cu. ft. Top Load Washer
2 year old Maytag (Whirlpool?) Insignia Model # MTW5630TQ1
Water level was set at highest level, but no water flowed when the machine was started. If the water level knob is held to "reset", then it would fill while holding.
The next day turned the water level knob to slightly lower level and it filled, BUT then it did not stop filling! Had to push timer knob to turn washer off and stop the water. Any ideas? Thanks!
Sounds like your water level switch is bad OR the small hose that goes from the waterlevel switch to the bottom of the tank has a hole in it.Try replacing this small hose first.you can go to an auto parts store and match it up.it's usually about 3' long and about 1/4" inside diameter and about 99cents a foot.
Posted on Aug 26, 2009
Tips for a great answer:
Jun 24, 2016 | Whirlpool Washing Machines
Dec 02, 2015 | Maytag MAV5920E Top Load Washer
Jun 05, 2010 | Whirlpool Washing Machines
Sep 22, 2009 | Maytag HAV3460AWW Top Load Washer
Jun 18, 2009 | Whirlpool LSN1000LW Top Load Washer
Jan 03, 2009 | Maytag Washing Machines
Oct 25, 2008 | Kenmore 24032\24036 Top Load Washer
Mar 19, 2008 | Whirlpool Estate TAWS750PQ 27-Inch Washer
Jun 06, 2007 | Maytag Neptune MAH5500B Front Load Washer
251 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: