AEG Lavamat W1050 Front Load Washer Logo

Related Topics:

Question about AEG Lavamat W1050 Front Load Washer

1 Answer

It fills with water but the drum doesn't turn

Posted by iansg60 on

Ad

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 574 Answers

Bad door switch.

Posted on Aug 25, 2009

Ad

3 Related Answers

richroth

Richard Roth

  • 9472 Answers

SOURCE: My Maytag Neptune MAH3000 drum

Does the door lock light come on when you start a cycle?

Posted on Jul 31, 2011

Ad

YOGENDRAN K

  • 57 Answers

SOURCE: The drum doesn;t turn during wash or spin cycle

Hi,
Kindly remove the back panel of the unit and check whether the belt is properly fixed if it is ok means check the wire connection if everything is fine. kindly check the motor humming sound once the water is filled if you find the humming sound means kindly replace the motor

Posted on May 18, 2010

YOGENDRAN K

  • 57 Answers

SOURCE: the drum fills with water when turned off....

Hi,
The inlet valve of the machine is faulty that means its always open kindly replace the inlet valve to get solved your problem

Posted on May 20, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

I have a GE washer model wwse3160a. It does not function except it fills with water. I checked the drive belt, I tried turning the motor clockwise and it spins the drum. All the lights come on but it...

Hello
I am familiar with this problem and 99% of the time it is caused by the washer lid safety switch, if the switch doesn't function the washer control will not let the cycle run past filling the tub with water. You can buy the part and get information on how to install it from a company called www.repairclinic.com
0helpful
1answer
1helpful
1answer

Turns on, fills with water, but then won't spin and makes a high pitch squeel. Belt maybe?

While the belt IS a possibility, you should check to make sure that the drum is not out of balance or that it is wedged somehow.

When the drum is empty, try to manually turn the drum. You should only being turning the resistance of the motor and belt; and the internal working of the tub, so it should turn under some pressure. BUT don't put excessive force into trying to turn it! If it doesn't turn with moderate pressure then something has come loose and wedged the mechanism. Which means that the drum system would need disassembled and repaired.
1helpful
1answer

Water continues to fill into the washer drum on the spin cycle.

Hi

You could have a stuck solenoid valve
Try this: Set the water temp on cold. Turn on only the hot water.
Does hot water try and fill the drum?
If so then there is a problem with the hot solenoid.

Next set the water on hot. Turn on only the cold water. Does cold water try and fill the drum ?
If so then there is a problem with the cold solenoid.
2helpful
1answer

The drum doesn;t turn during wash or spin cycle

Hi,
Kindly remove the back panel of the unit and check whether the belt is properly fixed if it is ok means check the wire connection if everything is fine. kindly check the motor humming sound once the water is filled if you find the humming sound means kindly replace the motor
1helpful
1answer

Hotpoint WT761 washing machine - Error code F-10 The machine is filling with water, then signalling F-10, then pumping the water out. So the fill solenoid and the pump are working OK. If I set the machine...

Thats strange, F10 means no cold fill.
Ok back to basics, you can check the pressure switch by taking off the tube and gently blowing into it and I mean gently, you should hear a click if its ok - make sure the other end is'nt blocked, blow it out with a cycle pump near the drum end
1helpful
1answer

Drum is filling with water after each wash

There is only 2 possibilities for the drum to fill with water after it has finished.
Firstly, if the empty pipe is connected to the sink outlet pipe, the water can syphon back into the washer if the pipe is too low, thereby slowly filling the washer when not in use.
Solution is to lift the outlet pipe higher.than the bottom of the sink.
The other reason is the inlet valve is not shutting off properly.
To prove if this is the case, turn the water off at the valve, if it is hot and cold fill, then turn the hot off only, and wait and see if water comes in over a period of time, if it does not then you need to replace the hot valve.
If water stills comes in with hot turned off, then you need to replace the cold valve.
If cold fill only , turn off cold and wait to see if any water comes in, if it does not, then replace cold valve.
Plz rate my solution.
Thanks.
0helpful
1answer

Drum not turning

My problem is the same as colins my hotpoint wm63 is starting okay i.e. water fills up but drum is not turning. I can hear it clicking through the cycle but drum doing nothing. i to have just put in new carbon brushes but still no joy please help

steve
0helpful
1answer

Drum filling up with water when not in use.....

only source is leaking inlet valves and only way to cure is to replace
Not finding what you are looking for?

348 views

Ask a Question

Usually answered in minutes!

Top AEG Washing Machines Experts

Brad Brown

Level 3 Expert

19166 Answers

john h

Level 3 Expert

28446 Answers

W.L.

Level 3 Expert

2511 Answers

Are you an AEG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...