Error Code I have the Bosch Axxis Condensation dryer in my apartment and I keep getting the error code E1 and the alarm starts beeping. My filter is clean and no hoses are blocked......HELP!

Probably a blocked or faulty internal inlet valve; check the feed filter which is visible inside the valve.

Cycle is interrupted and ''E1'' appears in display.

Condensate hose is blocked in some way. Turn off dryer and check hose.
Condensed water not pumped out (WTL 54 condensation models only). Pump failed.

Dado

It's a classical error code, you can find all the error codes together with the troubleshooter within the manual under this article:
Bosch Axxis Washer Manual

Hello,

Welcome to FixYa.

Can you possibly double check that model number and reply post. I ask because the "E1" error should only pertain to those models which are condensor (non-vented)... "WTL" dryers.

The error indicates either a blocked drain hose or a failed pump. This from Bosch...

E1 Pump failed

(WTL 5400condensationdryer only) Pump failed.

Check voltage at and wiring to pump.

Turn off dryer, measure pump resistance (110 - 136 ?) and replace faulty pump.

Also - Following items apply only to the WTL (Condensation Electric Dryer) models

Cycle is interrupted and ''E1'' appears in display• Condensate hose is blocked in some way. Turn off dryer and check hose.

I'll watch for your reply and try and help you move forward in any manner I can.

Regards,

Macmarkus :)

Faulty sensor

bad sensor or dirty

F03 MEAN SENSOR DEFAULTPUMP OR LENT

Try to vacuum clean inside the door contact breaker (female part). If you can remove the dust it should start working again.

I have a WTL 5400 electric condensation dryer (bosch). All of a sudden one day, it would not turn on. The lights are on, the filters are clean. Please Advise.
Harriet Scannon

have you checked the vent line it could be stopped up if the line is bent same affect as the lint filter being full