DVD player wont show picture

I need to know how to get the progressive scan feature turned off so I can view DVD's.

Magnavox DVD/VCR combo MDV560VR

progressive scan mode on screen all time no picture only sound

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Champion:

An expert who has answered 200 questions.
Expert
362 Answers

To turn it off select connection method 3 above and progressive scanning mode, to set the mode, set progressive to off in the display menu so that the p scan indicator light on the front panel goes out. do all of this in interface mode. you can also do this by pressing and holding PLAY > on the front of the unit for more than 5 seconds, still watch for the p scan indicator to go off. this works best when the unit is connected directly to the television.

Posted on Dec 09, 2007

1 Related Answer

Anonymous

1 Answer

SOURCE: DVD player wont show picture

take the dvd out and hold the stop button on the dvd player for 5 sec (not the remote) the dvd player and that will work

Posted on May 20, 2008

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

I am considering purchasing a Funai Full HD UpConvert DVD Recorder/VCR Combo. I have a HD Phillips TV with HDMI connections. I do not have cable - just use over the air TV. How do I connect the Fun

Purchase a DVD recorder/player that has a HDMI cable connection and use the connections on the TV so you'll get a hi def picture. RF will NOT give you a Hi Definition picture even if it's up converted.

Read full answer

Jan 01, 2015 • Funai Magnavox DV225MG9 DVD/VCR Combo...

0helpful

1answer

Progressive scan

I had the same problem once and the solution is to reboot the DVD player. to do this you need to unplug the unit for 3 or more minutes and then you will have to go through the setup process again but everything should work fine and interlaced (not progressive) should be the dvd format again.

Read full answer

Feb 05, 2009 • Toshiba SD-V392 DVD Player/VCR

2helpful

1answer

Magnavox MDV560VR DVD/VCR combi

f you accidentally set Progressive Scan to ON (within
Analog TV), press STOP 9 for five seconds to restore the
picture to normal operation.

Read full answer

Aug 13, 2008 • Philips Magnavox DVD/VCR Dual Player

2helpful

1answer

Progressive scan mode

f you accidentally set Progressive Scan to ON (within
Analog TV), press STOP 9 for five seconds to restore the
picture to normal operation.

Read full answer

Aug 13, 2008 • Philips Magnavox DVD/VCR Dual Player

2helpful

2answers

Dvd player stuck in progressive mode

ok i got a solutioN!!!

ok go to ur actual dvd/vcr player (not the remote) and press and hole the STOP botton for like 5-10 seconds.
thank goodnesss!!!!!!!!!!!!

your welcome! :]]

Read full answer

Jun 11, 2008 • Zenith XBV243 DVD Player/VCR

0helpful

1answer

Have sound,no picture

Do you have it hooked up using the component cables?(red, blue, green cables?) You need to use the component cables to use the progressive scan feature. So if you have it hooked up using the yellow rca jack, you will have to switch cables.

Read full answer

May 30, 2008 • GoVideo Go Video DVD/VCR Combo

6helpful

2answers

I need to know how to get the progressive scan feature turned off so I can view DVD's.

Thanks for the progressive scan advice. I have a Go-Video DV1130 Combo I didnt have a DVD in the combo and I pressed and held the stop button on the combo instead of the remote and it came out of the progressive scan mode so maybe it works both ways? But anyway Thanks for the advice it sure helped me.

Read full answer

Dec 31, 2007 • GoVideo DV1130 DVD Player/VCR

0helpful

1answer

Issues with my goldstar

Goldstar dvd/vcr combo was stuck in progressive scan. I used the posted solution and now it is out of progressive scan but it continuously reads the dvd and I cannot get the dvd to play. "Reading" conitues to appear on the screen. Any suggestions?

Thanks!
Patsy

Read full answer

Dec 29, 2007 • Goldstar GBV241 DVD Player/VCR

9helpful

3answers