Touch screen not work no response after i made hard reset

Even if you were able to get past the setup, you would still not be able to use the phone. Since you have already performed a factory reset, I would suspect the actual hardware to be faulty. Get it serviced at an authorised service centre

Hello,

Try performing a soft reset or a hard reset to the unit.
The soft reset is done by holding down the power button for at least 10 seconds and allowing the unit to power back on.
A hard reset is done by pressing and holding the bottom right hand corner of the screen while the power is off and then pressing the power button on. A pop up will appear asking to confirm the reset.
The hard reset will erase the user data, so it is advisable to save the data if possible.
Installing and running the Garmin WebUpdater to load or reload the latest update will resolve most issues.
download the latest version of WebUpdater software

The touch screen may need recalibration.
This can be done by pressing and holding the top left corner of the screen will powering on the unit.
Keep pressing the top left corner of the screen until the calibration screen appears.
Use a stylus or the round back part of a pen to press the dots to calibrate.
Once the calibration is done the unit will continue to boot up showing the Garmin screen.

You may also want to contact Garmin support for assistance.
http://www.garmin.com/us/support/contact

phine lock solution

Press the corners of the touch screen very hard with your fingers. Sometimes this works. If not you need a new touch screen.

is there the "calendar" and "contacts" menu buttons on the bottom of the black screen?

that's what would happen to me. i just turned off the touchFLO 3D on the today screen (by going to settings, then today screen options) and it seems to not go black anymore... even after being untouched for hours.

not sure if the same thing is happening to you, but it worked for me.

Among the many issues with the Touch, the camera is another. If a hard reset doesnt work, your device will need a new camera. If you have Sprint, this can be replaced at any service center for no charge if you have insurance and there is a part for immediate repair.

Just to confirm, when you do a hard reset make sure that you press and hold both of the softkeys while sticking the stylus in the reset hole until it asks to reset.

The factory reset code is 1122 or 2211 it's one of these I just dont remember it exactly

do a hard reset.

Had a similar problem today. Try doing like this: while the device is off get the battery, the sim-card and the microSD out. Then return them to their places and turn the device on

So far no fixes. It's just been collecting dust. I think it's a screen response issue, and will probably cost more to fix than to replace (at least for me) in my situation. I'm thinking iPhone....