Question about Curtis Televison & Video

Open Question

My curtis flat screen tv red light are blinking but tv won't come on manually or by remote. What can I do to fix this

Posted by Tracey King on

Ad

5 Related Answers

Anonymous

  • 133 Answers

SOURCE: Curtis Mathes TV Remote Control Codes for Programming the remote to the TV

I own a One-for-All universal remote, and my booklet says the setup code for a Curtis Mathes TV (without a built-in DVD or VCR) is one of the following numbers: 0030, 0047, 0054, 0060, 0093, 0145, 0154, 0166, 0451, 0702. I can not guarantee these numbers will work with your remote, but it is worth a try.

Posted on Jul 06, 2008

Ad

Anonymous

  • 320 Answers

SOURCE: 42 in SONY LCD flat screen has red light blinking and won't turn on

Does the red light blink in a discernible pattern? How many times does it flash or blink?

Posted on Oct 19, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: LG LCD Flat screen 32 screen blank red light blinking cable on

The Lg lcd was srtruck by a remote and now looks like a small crak on the inside towards the bottom right hand corner and there is no picture but audio does work

Posted on Nov 09, 2008

SOURCE: Black screen and no sound on TV

what is the brand, model? try to be specific if you want be helped!!!

Posted on Sep 11, 2009

Anonymous

  • 1 Answer

SOURCE: Philips 42" Flat Screen Plasma - blinking red light 7 times - HELP please!

6f4eeb8.jpg
Here is a photo of the board where I have removed the two from my TV. You can see the two open holes.

Posted on Dec 12, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a Curtis LCD TV. The red standby light turns on when I plug it in, but will not turn on (either by remote or the physical button on the TV). What could be the problem?

There could be a list of different problems. Usually, the red lamp will blink in a particular sequence, which tells the tech which board is most likely the problem. This is not a 100% accurate, because another board that has an issue, could cause the first board to interpreted incorrectly by the microprocessor IC(computer within your TV)
0helpful
1answer

Fujitsu plasmavision won't turn on

How many times do the red light blinks at a time? Count it. It is fault indication. After counting it, click here for details.
0helpful
1answer

I need code for curtis tv and proper direction how to install and retain code

Hello
Three digit universal remote for Curtis TV are:-
000/ 001/ 004/ 009/ 015/ 031/ 049/ 105/ 109
Four digit universal remote code for Curtis are:-
0031 0105 0130
........................... 0004 0009 0000 0049
........................... 0109 0358 0001 0015

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.

NB:- Please turn OFF and switch it ON with its front panel power control switch each time before trying an other code. OK.
0helpful
1answer

I have a universal remote control that I want to use with my Curtis Mathis TV. What code do I need to use to make the remote compatible with the TV?

Hello

Thee digit universal remote code for Curtis Mathis are:-
000/ 001/ 004/ 009/ 015/ 031/ 049/ 105/ 109
Four digit universal remote codes for Curtis Mathis are:-
0031 0105 0130
0004 0009 0000 0049
0109 0358 0001 0015

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
0helpful
1answer

Green light blinks when curtis flat screen is turned on. No picture nor sound.

power supply problem, or bad inverter, need to be replaced.

I’m happy to help further over the phone at https://www.6ya.com/expert/david_92c86cbc79e9b552

1helpful
1answer

Black screen and no sound on TV

what is the brand, model? try to be specific if you want be helped!!!
0helpful
1answer

TV blew out

if the lamp light is flashing u need to replace the lamp. u should have instructions on the set or in the manual
27helpful
4answers

Curtis Mathes TV Remote Control Codes for Programming the remote to the TV

I own a One-for-All universal remote, and my booklet says the setup code for a Curtis Mathes TV (without a built-in DVD or VCR) is one of the following numbers: 0030, 0047, 0054, 0060, 0093, 0145, 0154, 0166, 0451, 0702. I can not guarantee these numbers will work with your remote, but it is worth a try.
Not finding what you are looking for?
Televison & Video Logo

Related Topics:

132 views

Ask a Question

Usually answered in minutes!

Top Curtis Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76763 Answers

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

588 Answers

Are you a Curtis Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...