Question about Radio Communications

How can I scanner the range frecuensis 225 to 290 MHz

1 Answer

Kristyanna Virgona

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.
Contributor
28 Answers

First of all what radio are you using?

Posted on Oct 03, 2019

Add Your Answer

Upload

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Regency R1077 base scanner can not delete old frequencies to reprogram scanner

Press "Manual", then press digit key ("0/10" thru "9") that corresponds with the channel to be changed ("0/10" = ch10). Next, press the digit and decimal point keys to enter the frequency in megahertz (Mhz) to be stored in the channel. To store 453.100 Mhz in channel 2, you would press "Manual", then "2". Press the following keys in order: "4" "5" "3" "." "1" "0" "0", followed by pressing the "Enter" key. Repeat this process for up to 10 channels.If you wish to clear unused channels, you should be able to select the channel, then enter "." followed by the "Enter" key.

This scanner will only accept frequencies between 30.000Mhz and 599.999 Mhz. Attempting to input frequencies outside this range will result in an error message.

I hope this helps and good luck! Please rate my reply. Thanks.

Jul 11, 2011 | Radio Shack Pro-96 Scanner

1 Answer

LOST MY MANUAL TO MY UNIDEN BEARCAT BC142XL CAN I GET A FREE REPLACEMENT

The manual isn't online to my knowledge however I did find a guide on how to program it.
"Turn it on. Push the "MANUAL" button to stop it from scanning.

Push number 1, then push "MANUAL" again. This should leave you on
channel one.

Using the keypad enter the frequency you want to monitor, then push
"E." Press "REVIEW" at anytime to see what frequency is programmed
there. If the review button flashes 000.0000 on the LED readout
display, you might be entering an invalid frequency. Refer to the list
of acceptable frequencies in the Frequency Range Bands below.

Push "MANUAL" to step to channel number two. Enter the frequency. Push
"E." Push "MANUAL" to step to channel three. Repeat this process until
all the (10) channels are full, or you've run out of frequencies to
enter.

Push "SCAN" to start automatically scanning the frequencies. The
radio will stop when it hears someone talking, and resume scanning two
seconds after the conversation has stopped.

Frequency Range Bands:

20 to 29.7 MHz (10 Meter "Ham" Band)
29.7 to 50 MHz (VHF Low Band)
50 to 54 MHz (6 Meter Amateur Band)
136 to 144 MHz (Military Land Mobile)
144 to 148 MHz (2 Meter "Ham" Band)
406 to 420 MHz (Federal Government Land Mobile)
420 to 450 MHz (70cm "Ham" Band)
450 to 470 MHz (UHF Standard Band)
470 to 512 MHz (UHF "T" Band)"

http://newsgroups.derkeiler.com/Archive/Rec/rec.radio.scanner/2006-01/msg00174.html
Hope this helps.

Apr 22, 2011 | Office Equipment & Supplies

1 Answer

I have a Uniden Bearcat 30 Channel 10 Band Radio Scanner how do I program it when I put in the number it shows error

The ERROR message usually indicates that you've tried to program a frequency outside the scanner's tuning range. The BC60XLT top tuning range is the 512 MHz band, so you cannot tune any 800 MHz frequencies. For further information you can download and print the factory manual, at no cost, here:

http://www.uniden.com/pdf/BC60XLTom.pdf

Bill B.
Listening in since the 60's

Apr 01, 2011 | Uniden BC60XLT Handheld Scanner

2 Answers

Why can't i listen to aircraft pilots & tower on my Uniden bearcat BC60XLT-1? Our airband frequency here is 108-137 mhz.

Your scanner does not receive frequencies between 54 and 137 MHz, and there's nothing you can do to enable reception in that block. Your only option is to purchase a scanner with air band coverage. Here are the reception ranges of the BC-60XLT-1:

29.0-29.7 MHz 10 Meter Amateur Band
29.7-50 MHz VHF Low Band
50-54 MHz 6 Meter Amateur Band
137-144 MHz Military Land Mobile
144-148 MHz 2 Meter Amateur Band
148-174 MHz VHF High Band
Above bands in 5 kHz steps
406-420 MHz Federal Government
420-450 MHz 70 cm Amateur Band
450-470 MHz UHF Standard Band
470-512 MHz UHF "T" Band
Above bands in 12.5 kHz steps

Need the manual for your scanner? You can download and print it, at no cost, here:
http://www.uniden.com/pdf/BC60XLT-1om.pdf

Bill B.
Listening in since the 60's

Feb 26, 2011 | Uniden Radio Communications

1 Answer

How do i convert to 800 mhz

You didn't mention the make or model of your scanner, but if it's not equipped with 800MHz coverage from the factory, there is no way to "convert" it to pick up that frequency range. For a list of reasonably priced scanners that will meet your needs, visit www.ScannerMaster.com

For a comprehensive database of active frequencies and systems in your area, and a lot of other useful scanning information, visit www.RadioReference.com

Bill B

May 18, 2010 | Radio Communications

2 Answers

Need a free printable user manual for Bearcat scnner BC142XL

Its so easy to use you really don't need a manual for the Uniden BC142XL scanner.

Turn it on. Push the "MANUAL" button to stop it from scanning.

Push number 1, then push "MANUAL" again. This should leave you on channel one.

Using the keypad enter the frequency you want to monitor, then push "E." Press "REVIEW" at anytime to see what frequency is programmed there. If the review button flashes 000.0000 on the LED readout display, you might be entering an invalid frequency. Refer to the list of acceptable frequencies in the Frequency Range Bands below.

Push "MANUAL" to step to channel number two. Enter the frequency. Push "E." Push "MANUAL" to step to channel three. Repeat this process until all the (10) channels are full, or you've run out of frequencies to enter.

Push "SCAN" to start automatically scanning the frequencies. The
radio will stop when it hears someone talking, and resume scanning two seconds after the conversation has stopped.

Frequency Range Bands:

20 to 29.7 MHz (10 Meter "Ham" Band)
29.7 to 50 MHz (VHF Low Band)
50 to 54 MHz (6 Meter Amateur Band)
136 to 144 MHz (Military Land Mobile)
144 to 148 MHz (2 Meter "Ham" Band)
406 to 420 MHz (Federal Government Land Mobile)
420 to 450 MHz (70cm "Ham" Band)
450 to 470 MHz (UHF Standard Band)
470 to 512 MHz (UHF "T" Band

If this helps, please take a moment to give us a rating -- and a rating of "very helpful" would be greatly appreciated.

Sep 06, 2009 | Uniden BC-95 XLT Scanner

2 Answers

Dont no how 2 get police chanel or others thank u

try to scan frequency range bet 140 - 160 mhz in VHF range and 300 - 400 in UHF range for police frequencies..... ;-)

May 24, 2009 | Uniden BC92XLT Handheld Scanner

1 Answer

My scanner is locked on hypersearch. How do I get

Answer: Hypersearch can only be turned on and off through a limit or direct search. To turn it off, you should do the following: Through Limit Search:

Press PROG, then LIMIT (SRC). Lo and 29.000 MHz appear. 29.000 MHz is the low end of the scanner's range.
Enter the frequency that is the lower limit of the range you want to search (including the decimal point), then press E (SVC).
Press LIMIT (SRC). Hi and 1300.00 MHz appear. 1300.000 MHz is the upper limit of the scanner's range.
Enter the frequency that is the upper limit of the range you want to search (including the decimal point), then press E (SVC) again.
Press \/ to search from the upper to the lower limit or /\ to search from the lower to the upper limit.
While the scanner is searching or is on a transmission, press H/S.
HYPER should disappear from the display.

Through Direct Search:

Press MAN.
Enter the frequency you want to start from using the number keys. (Press . to enter a decimal point). NOTE: To start the search from a frequency already stored in one of your scanner's channels, press MAN or PROG. Then use the number keys to enter the channel number and then press MAN or PROG again. If you enter an invalid frequency, the scanner displays Error. Press MON/CLR (.).
Press \/ to search downward or /\ to search upward from the selected frequency. -d-, SEARCH, and either \/ or /\ appear.
While the scanner is searching or is on a transmission, press H/S.
HYPER should disappear from the display.

May 15, 2009 | Radio Shack Pro-94 Scanner

1 Answer

Codes for frequencies-presque isle,maine

Check out this site:
http://www.rfwiz.com/Frequencies/Maine/MaineTownsCounties.htm

They got a load of frequencies there.
Here are some distress frequencies that are world-wide:

Civil Aviation: 121.5 MHz
Military Aviation: 243 MHz
Short Range Maritime: 156.8 MHz
Medium Range Maritime: 2182 KHz

Bear in mind that you can only tune into some of these if your scanner is able to pick up the frequencies.

Feb 05, 2009 | Uniden BC72XLT Handheld Scanner

1 Answer

Scanner problem

Your scanner will only operate in these ranges 25-54, 108-174, 406-512 MHz. If the number you seek is outside this range then you may have to buy a digital scanner which will be $300 to $500.

http://www.uniden.com/products/productdetail.cfm?product=BC72XLT

Jan 05, 2009 | Radio Communications