PS3 screen flash / sound cut-out

Sounds like the screen is no good or the circuit board with the drivers that operate the screen went bad which is a replaceable item

You need to be sure your cuff is at heart level when reading. If cuff is down by your lap, reading will be abnormally high this way..
systolic is when sounds cuts off.. Diastolic is when they pick back up again. Does that make sense to you?

How to fix ps3 yellow light of death 3. tips first

1)Turn off your playstation 3. If you think your ps3 has been caught by the heat, then wait at least 20 minutes and put it back on again

2) Check if there's any loose cable.

3) Try to put out your playstation's hard-drive, and put it back in. You might want to repeat this 2-3 times for better results.

If this did not work, then there are 2 options left for you on how to fix your ps3 safe and fast!

Send your playstation 3 back to Sony

You might think that this is an great option, but take a look at some statistics. Most users had to wait at least 4-6 weeks before they had their Console back. And also, if your warranty is expired, you have to pay a big fat $150,- to get the job done! Does this still sound as a good option?

I would replace the lower Y buffer. Part number 996500032640. Goodluck.

Ur LCD inverter backlight board is dead.Replaced this board will get ur picture back.It a long board in shape.Tries Shopjimmy.com,Ebay.com to buy a refurbish LCD inverter backlight board for replacement.

filters can be damaged or the same regulatory review them also give load screen

I would suggest this (you haven't said what kind of tv you have). I have a 37 in vizio, and a 25 vizio flatscreen HD tv. I had my PS3 hooked up using HDMI first time I tried it I got the little pixels you were talking about...so do this. Sounds stupid but it helped me. The HDMI cable where it plugs into the tv plug and unplug a couple times (three times worked for me. Do the same at the PS3 side of the cable. You want to do this with both of the machines off. Also make sure you have the PS3 configured appropriately for your TV settings...There is a way you can auto setup the screen and sound by shutting the PS3 off and holding your finger on the power button for like 5-10 seconds (it will beep twice) then let your finger off the power button.

When my HDMI cable went bad it would go from having a picture and sound to having no sound and a picture, to no sound and no picture. I thought I had a bad HDMI slot...but it was just a bad HDMI cable

Your printer cogs may be damaged or your paper rollers could be slipping resulting in this "odd" output.

Paper rollers can be cleaned with an appropriate cleaning kit but if the cogs are damaged it's not worth repairing.

Ok do not worry this may mean two things crached hard drive or a corrupted hard drive all you have to do is turn it on but let the red ligth be on turn it on do not remove your finger from the button until it go's off again turn it on again keep your finger until it makes a sound but still do not remover your finger untill it makes two sounds after eachouther take your finger of fast nou a screen will apear say restore sestem untill your ps3 works again it take 1-4 trys and if nothing happens you must format it.HOPE I WAS USEFULL PLZZ RATE ME AND IF THERE IS ANYTHING ELS EMAIL ME TO [email protected] I DO PS1,2,3,DVD PLAYERS AND PC sorry for my spelling i am only 13 and i afrikaans BUT PLZZZ RATE ME.i have the same question does anybody give a ****?

It sounds as you desribe, the vertical output IC and or the b+ feed capacitor off the Hi voltage transformer feeding the vert. IC its required voltage. Not a really hard job to replace, but not for a handi person to do. This should be left to the professional, as there are no user serviceable parts inside this set and with the HI voltage and the safety issues its best to call somesone to assist you with this repair. Good Luck