Question about Furniture
Are you sure that is the right part #. Hp has a part # RM1-0043 for a swing plate assembly. If you have one white gear and one black gear you should be ok. I STRONGLY recommend a service technician if your not technically incline.
To replace the swing plate assembly you will first have to remove ALL COVERS top , left, right, front, back. then black paper guide behind fuser, then fuser. next remove main control board and black fan connector and plate. on the otherside(left cover side) of the main board. To make this simple you will have to remove the power supply which sits under your toner cartridge. Good luck
Posted on May 25, 2009
First, fold the seat all the way until it lays flat on itself, use the side lever or pull the strap from the back. This will release the seat back, now tilt the seat forward raising the rear part of it, make sure that there is enough space with the front seats to allow it to go all the way until the top part of the seat touches the floor, in this position pull the black strap you will find underneath the seat cushion. This should release the seat, now you can tilt it back and should be able to get it out.
Posted on Jun 30, 2009
Tips for a great answer:
Oct 08, 2018 | Baby Gear
Aug 03, 2018 | Cars & Trucks
Apr 26, 2018 | Garden
Apr 14, 2018 | Garden
Apr 07, 2018 | Miscellaneous
May 23, 2014 | Frugah Outsunny Folding Garden Kneeler /...
Feb 05, 2013 | Ekornes Stressless Recliner Chair Swing...
Feb 28, 2021 | Furniture
158 people viewed this question
Usually answered in minutes!