Garden Logo

Related Topics:

Question about Husqvarna Garden

Open Question

My Husqvarna rz46i zero turn acted like transmission was slipping . now wont move at all

Posted by tim howell on

Ad

4 Related Answers

emissionwiz

Marvin

  • 85241 Answers

SOURCE: transmission slip wont move

once an automatic transmission starts slipping that is it, it must be tron down the system flushed of all clutch material and rebuilt, this requires a very high degree of training and skill, automatic transmission repair is a very specialized field and takes years to learn. If u plan on repairing this your self, flush the fluid out of the lines and cooler and then buy a factory rebuilt transmission and torque converter.

Posted on Sep 30, 2010

Ad
alicantecoli

Colin Stickland

  • 22509 Answers

SOURCE: after driving the vehicle for

suspect front clutch needs replacing

Posted on Apr 24, 2011

Ad

Anonymous

  • 312 Answers

SOURCE: transmission is slipping

transmishion plate on stick ie manual on auto it will be tork converter

Posted on Aug 17, 2012

my_names_not

Lee Parker

  • 108 Answers

SOURCE: My husqvarna zero turn will not move forward or backwards, it just stopped when I was putting it in the shed.

Check to see if your drive belt has broken or slipped off the pull.

Posted on Sep 05, 2017

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Husqvarna P-ZT-60 mower zero turn left tire and transmission pops and jerks when turning left. Can you help me troubleshoot?

Your best taking it to a good lawnmower repair shop as they will have the tools to find and fix the problem.
I'm assuming you mean there is no power going to the left wheel? I am not very familiar with Husqvarna mowers but this sounds like there is a problem with the drive system or transmission links.
You could try safely raising both back wheels, (drive wheels), off the ground onto axle stands. With the power OFF turn each wheel by hand. They should turn smoothly and feel the same. If one side is slack, tight or 'notchy', that is the side where your problem is likely to be.
Carefully start the mower and GENTLY apply power to see if both wheels turn together.
The popping and jerking could be the drive system slipping and missing.
0helpful
2answers

My husqvarna zero turn will not move forward or backwards, it just stopped when I was putting it in the shed.

Hopefully your drive belt has slipped off pulley otherwise could be transfer case.
0helpful
1answer
0helpful
1answer
0helpful
1answer
0helpful
1answer

Zero turn rz4623 won't move

wont drive ???
check the belt, check the fluid, check the dump valves
wont push, check the brakes and the dump valves
3helpful
1answer

How do I move a Husqvarna zero turn mower when it won't start? I thought that it had a "neutral" position to roll the machine, but I can't find it in the manual.

There is a lever on the back of the machine (yours may have two), down low on the back plate. Pulling the rods out will release the transmission so that the mower may be rolled.
Best regards, (and please rate this solution), --W/D--
Not finding what you are looking for?

450 views

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Dwain Pippen

Level 3 Expert

377 Answers

Jay Finke
Jay Finke

Level 3 Expert

1395 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...